1












This kit includes
complete 200Wc kit for motorhome with solar panel, cells guaranteed 20 years.
The panel and battery wiring is in 4mm² double insulation to guarantee a charge without any losses.
Charging the battery in 3 steps ensuring an extremely clean charge of it.
Cells |
Monocrystalline |
Maximum power (Pmax) (W) |
100 W |
Maximum peak current (Imp) (A) |
5.83 A |
Maximum Peak Voltage (Vmpp) (V) |
17.18 V |
Open Circuit Voltage (Voc) (V) |
22.08 V |
Short circuit current (Isc) (A) |
6.03 A |
Operating temperature (°C) |
-40 to + 85 |
Max reverse overcurrent protection (A) |
15 |
Output power tolerance (%) |
0 /+3 |
Maximum System Voltage (Vdc) |
1000 |
The kit is equipped with special 4mm² double insulation solar cables. This important section guarantees that it does not heat up even in case of large production, so we are sure to have an optimal charge of the battery by minimizing the losses to the maximum.
5 m of cable with the connectors type mc4 set on the cable are provided to connect the panel to the charge regulator. The MC4 type connectors guarantee a perfectly sealed connection between the panel and the cable, and also make it possible to remove it very easily
2m of battery cable with set battery pod are also provided.
Connector type MC4 double male + female
To connect your panels in parallel
The kit is delivered complete, the assembly is limited to the attachment of the panel on the vehicle as well as the wiring of the charge regulator
8 corners of fasteners to install a solar panel on the roof of a motorhome,
The corners stick to the roof of the motorhome with the glue provided and the panel is screwed on them.
The panels are raised by a few centimeters, which allows good ventilation of these and minimizes as much as possible the losses due to high temperatures.
More functions with MT50 display
Choice of the different modes of control of the 12/24V output:
On/OFF Manual,
Light ON / OFF,
ON Light + Timer,
Schedule only
Selecting battery type and capacity
Possible modification of all charging voltages
Real-time monitoring of the entire installation