Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation
Structure for solar panel installation

FlatFix flat roof system for panels from 98 to 104 cm wide

€98.03
Tax included
FlatFix-pan-98-a-104
0712971129665

Opt for versatility with the FlatFix system: the ideal solution for your solar panels on flat roofs or on the ground.

The FlatFix mounting system (suitable for panels measuring 98 to 104 cm) offers maximum flexibility for your photovoltaic installations. Whether on a flat roof or directly on the ground (garden, terrace, flat surface), this weighted support guarantees perfect stability without any drilling, thus preserving the integrity of your support.

With its fixed 13° tilt, it provides the ideal compromise between annual energy yield and low wind resistance. Its aerodynamic design and "thermal decoupling" system protect your modules from mechanical stress caused by temperature variations. Lightweight and robust, the FlatFix can be assembled in record time thanks to its patented click-together system.

FlatFix Fusion mounting system for solar panels on flat roofs

FlatFix Fusion is the benchmark solution for mounting solar panels on flat roofs without drilling. Thanks to its lightweight structure and flexible configuration (south or east-west), it allows for a customised photovoltaic installation that guarantees optimal energy production.

IncludeD Élément de base supérieur - FlatFix

Upper base element

Clip-on top bracket that secures the solar panel and defines the angle of inclination of the structure.

Included Embase support de toit - FlatFix

Roof support base

The FlatFix Fusion base is a protective base that stabilises the structure on the roof while absorbing thermal expansion.

Included Élement de base inférieur - FlatFix

Lower base element

Lower base element ensuring the stability of the structure and protection of the roof.

Included Profilé de base - FlatFix

Base profile

The FlatFix Fusion base profile is the horizontal rail that connects the supports to ensure the alignment and rigidity of the structure.

Included Clame de milieu - FlatFix

Middle clamp

Intermediate fastener that secures the panels and automatically grounds them.

Included Clame de fin - FlatFix

End clamp

End clamp for securely locking the last panel at the end of the line.





Structure légère

Compatible with almost all flat roofs

Whether your roof is made of bitumen, EPDM or PVC, FlatFix Fusion can be installed without drilling. Its universal design allows it to be installed on any flat surface while maintaining the waterproofing of your roof covering.

Montage Rapide

Ultra-fast "click" assembly

The main components are assembled using self-clicking joints. No need for multiple tools: the system clips together easily, radically reducing installation time.





Thermal integrity and building protection

The movable joints absorb thermal expansion. This decoupled system prevents any transmission of stress to the solar panels and preserves the long-term waterproofing of the roof.

Strategic ballasting and aerodynamics

Thanks to its 13° tilt angle and streamlined design, FlatFix Fusion requires minimal ballasting at strategic points, ensuring stability without structural overload.

Intelligent cable management

The structure incorporates cable guides to reduce the risk of interference and prevent direct contact between the cabling and the roof surface.

Transport and handling

Comprising a small number of lightweight parts, the system is easy to transport and handle. A single standard tool is all that is needed for complete assembly.





How to configure your system?

Guide

1. Select the number of panels per row from the options.

2. For multiple rows, add each configuration to the basket individually.

Note: Compatible with panels 98 cm to 104 cm wide.





Complementary products to the basic kit (not included):

Déflecteur de vent de côtés

Side wind deflectors

Ensures the aerodynamics of the system by closing the sides. Protects against wind and reduces the ballast load required.

Déflecteur de vent arrière

Rear wind deflector

Rear protective plate that deflects airflow over the panels for maximum stability while maintaining good ventilation.

Rear deflector
Rack de lestage

Ballast rack

Allows ballast (bricks, concrete blocks or other items) to be placed securely under the structure to stabilise it in windy conditions.

Ballast rack





FAQ - FlatFix Fusion System for Flat Roofs

1. What are the dimensions of panels compatible with FlatFix Fusion? +
This system is specifically optimised for photovoltaic panels with a width between 98 cm and 104 cm. This precision ensures a robust fixing and a perfect fit for the aerodynamic components.
2. What is the tilt of the panels with this system? +
FlatFix Fusion offers a fixed tilt angle of 13°. This angle has been carefully calculated to offer the best compromise between solar energy capture, natural rainwater drainage and low wind resistance.
3. How does the system protect the waterproofing of my roof? +
Thanks to its thermal decoupling device, the structure allows the components to expand and contract independently of the support. This prevents any friction or damage to the waterproofing of your flat roof in the long term.
4. Why is FlatFix Fusion particularly aerodynamic? +
The use of rear and side deflectors allows the wind to flow around the structure rather than rushing underneath it. This design reduces the lifting effect and significantly minimises the need for ballasting.
5. Is it possible to install this system on your own? +
Yes, this system is designed for quick and intuitive installation. Lightweight materials and clip-on components allow for efficient installation, improving the efficiency of the installation while ensuring a perfectly secure structure.
6. What materials are used to ensure durability? +
FlatFix Fusion combines high-quality aluminium and galvanised steel for its structural elements, complemented by UV-resistant synthetic components. This combination ensures optimal weather resistance.
7. Is the FlatFix Fusion system compatible with all types of flat roofs? +
This versatile system is suitable for most flat roof coverings. Thanks to its light weight and lack of mechanical fastenings in the roof, it respects the integrity of your structure while adapting to the specific constraints of each building.
8. How does the system manage panel cabling? +
FlatFix Fusion features intelligent cable management. The structure allows photovoltaic cables to be neatly secured and protected, preventing them from lying loose on the roof and ensuring maximum electrical safety.
FlatFix-pan-98-a-104

Data sheet

Mounting
Flat roof - floor structure
Video Youtube 1 - ID
DHAIzTMXEl8
Video Youtube 2 - ID
UEzalJ9y_bM

Specific References

UPC
71297112966
EAN13
0712971129665
New

You might also like