FlatFix Fusion right-hand wind deflector for 98 to 104 cm panels
€14.70
Tax included
1007225
8719925885334
This product is a straight wind deflector used to protect the side of a row of solar panels installed on a flat roof with the FlatFix Fusion system. It acts as a side finishing piece that reduces the impact of wind and weather on the photovoltaic field, while maintaining moderate ventilation around the modules to promote passive cooling.
This accessory is designed for panels 98 to 104 cm wide and integrates directly into the FlatFix Fusion ecosystem. The deflector is sold individually and , for complete protection of the system, two pieces are required: a left deflector and a right deflector. In addition, rear protection is provided by the FlatFix Fusion rear wind deflector, and mechanical wind resistance is reinforced with the FlatFix Fusion ballast rack, depending on the size of the installation.
The design and materials of the deflector contribute to more stable operation of the PV array and can help keep the panels up to 5°C cooler, which helps to maintain yield and longevity on an exposed installation.
- Compatible system: FlatFix Fusion (flat roof)
- Position: right side, row end
- Module compatibility: panel width 98 to 104 cm
- Function: wind protection, ventilation, passive cooling
- Packaging: sold individually, left + right required
FlatFix reference: 1007225
FlatFix Fusion right-hand wind deflector for 98 to 104 cm panels
The FlatFix Fusion left wind deflector is a crucial aerodynamic protection component for photovoltaic installations on flat roofs. Designed by ESDEC, this side fairing closes the mounting structure to prevent wind from rushing under the solar panels, thereby drastically reducing uplift force.
Why is this deflector essential?
On a flat roof, wind creates areas of high and low pressure. Without deflectors, the installation acts like a sail, which would require excessive ballast (weight) to remain in place.
The advantages of the ESDEC deflector:
- Structural safety: Protects the installation from being lifted during storms or strong winds.
- Reduced ballast: By optimising aerodynamics, you reduce the total load (weight) on the building's structure.
- High-performance material: Made of galvanised steel or high-strength alloy, ensuring durability against salt corrosion and UV rays.
- Compatibility: Specifically adjusted for new-generation solar panels with a width between 98 cm and 104 cm.
Installation and implementation
The deflector is attached to the left side of each row of panels. Thanks to the FlatFix Fusion system, assembly is quick:
- Position the deflector on the outer edge of the structure.
- Secure it using the mounting clips provided.
- Ensure that it rests correctly on the base for optimal wind resistance.
Tip: Don't forget to order the corresponding right-hand deflector to close the other end of your row and ensure symmetrical protection.
1007225
Data sheet
- Mounting
- Flat roof - floor structure
Specific References
- UPC
- 719925885334
- EAN13
- 8719925885334
- MPN
- 1007225
New
You might also like
FlatFix Fusion right-hand wind deflector for 98 to 104 cm panels — Mounting systems
FlatFix Fusion right-hand wind deflector for 98 to 104 cm panels is available in our Mounting systems catalog. Technical specifications: mounting: Flat roof - floor structure. Product weight: 1.1 kg. Reference: 1007225.
