FlatFix flat roof system for panel widths from 98 to 104 cm

Lightweight, flexible mounting system for solar panels

FlatFix Fusion is used for mounting solar panels on flat roofs. The lightweight structure allows panels to be custom-mounted to provide the optimum solution for any flat roof.
The system is designed for fast, easy assembly using few components. The main components are connected to each other by means of interlocking notches. All you need is a tool to mount the solar panels. This significantly reduces installation time without compromising quality!

Wiring management :

To reduce the potential risk of interference in panel wiring, the structure incorporates a cable management system. This also prevents cables from dragging on the floor.

- This system is suitable for panels 98cm to 104cm wide (with 94cm profile).
If your panel exceeds these dimensions, you can redirect to the FlatFix fastening system for panels 105cm to 115cm wide (103cm profile) by clicking here.

Suitable for virtually all flat roofs.

Installation is quick and easy, with a minimum of ballast. What makes this system unique is its flexibility: the same parts can be used to build a classic south-facing installation, for east-west or north-south exposure.
Thanks to its 13-degree tilt angle, the PV system will produce a good yield in almost any orientation.

Requires little ballast!

Flatfix Fusion is a lightweight structure requiring little ballast at strategic points. This means you don't need to add too much extra load to a roof.

Thermal integrity and robustness

The system's components are connected by fixed parts with self-locking interlocking joints. The system is designed to prevent the thermal effects of the building being transmitted to the panels and vice versa. This prevents damage to the panels or the integrity of the roof.

Transport and handling

The components of the fastening system are assembled using self-locking connectors. The system consists of a small number of parts and requires very little hardware, making it easy to transport, handle and assemble.

How to choose the right system for my panels

Choosing the right mounting system for your panels couldn't be easier: simply select the number of panels per row in the options.

If you want a 2nd row, you'll need to add a second mounting system to your basket.

>> Accessories are also available at the bottom of the product page: wind deflectors and ballast rack.

BASIC PARTS

The basic parts of the FlatFix system enable you to mount your panels on a structure.

COMPLEMENTARY PRODUCTS TO THE BASIC KIT (not included) :

The basic system can be complemented by 3 additional products to optimize and secure your panels (useful depending on conditions of use).

Rear wind deflector - FlatFix

Protects the system and panels from the wind, while remaining open for ventilation.

See the rear wind deflector

Ballast rack - FlatFix

Ballast rack to securely hold the structure in place.

See ballast rack