Since 2008
Based in Belgium and France
+ 60 000 clients
Our blog
A.S.S.
Shopping Cart
Inverter Victron Multiplus 12V: 3000VA, 24V: from 3000 and 5000VA, 48V: from 3000 and 5000VA.
The Victron Multiplus inverter combines a Pur Sinus inverter, a sophisticated charger and an ultra-fast AC transfer switch in a single compact package.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Converter Victron Multiplus de 3000 et 5000 - 12V / 24V / 48V
Review sent
Your review cannot be sent
You are about to create a quotation for the kit Converter Victron Multiplus de 3000 et 5000 - 12V / 24V / 48V.
This action will open the quotation app in a new tab.
The Victron Multiplus inverter has many functions. It combines a sine wave converter, a sophisticated charger and an ultra-fast AC transfer switch in a single compact housing. It's a powerful battery charger that demands high currents. Charging power can be limited via the control panel.
The most important functions are "Powerassist" and "Powercontrol". These functions take energy from the batteries and add it to the output when demand exceeds the capacity of the genset or shore power. Thanks to these functions, it is possible to manage peak currents in excess of the power of a genset or connection for a given period of time. Surplus power is used to recharge batteries when power demand falls.
The MultiPlus will prevent overcharging of a limited AC source, such as a shore power or generator connection. First, the battery charging process will be automatically reduced; otherwise, overcharging will occur. Then, the output of a generator or shore power will be stimulated by extracting power from the battery.
In the event of a mains failure or disconnection of the shore power or generator, the Multi's inverter automatically activates and resumes power supply to connected loads. This transfer is so fast (less than 20 milliseconds) that the operation of computers or other electronic equipment will not be disturbed.
Up to 6 Multi's can be operated in parallel to obtain more output power. Three-phase or split-phase operation is also possible. Please check our datasheets to see which models are available for parallel, three-phase or split-phase operation.
When paired with a GX device (e.g. a Cerbo GX), you can supervise and control your Multi and system(s) either locally (LAN) or remotely over the Internet from anywhere in the world via the free VRM app and the free VRM website. You can access it from a phone, tablet, laptop or PC running different operating systems. There's no limit to the level of control you can have over your system, whether it's making settings on your Multi or initiating automatic start-up of your standby generator, and much more... "
The main output provides a continuous power supply. In the event of grid disconnection or failure, the multiplus inverter takes over very quickly (20 milliseconds) to supply the connected loads, so that the operation of connected electronic devices is not disrupted. The second output is active when AC is available on one of the inverter inputs. It can be used to connect devices that would not discharge the battery (a water heater, for example).
You can connect up to 6 multiplus inverters in parallel to boost output power.
You can connect 3 multiplus inverters of the same model for three-phase output. (up to 6 series of 3 inverters)
The powerful battery charger built into the unit requires high currents when connected. The control panel limits this power and uses only the surplus for charging, thus avoiding overloads.
This function supplements the capacity of the AC source in the event of short-term power demand. When power demand falls, the surplus is used to recharge the batteries.
The multiplus inverter is ready to use straight out of the box, with no need for a PC to program it. Operation can be programmed using DIP switches.
Victron inverters come with a 2-year warranty.
Monitor and manage your Victron Energy system. Log in with your VRM account to see all your products. Tap on a product to see its schematic, system status and energy flow.
The Victron app is available free of charge from the Apple app store.
The entire Victron MultiPlus range is available as an option (in the drop-down menu at the top of the page).
(Datasheet available for download)
check_circle
This store asks you to accept cookies for performance, social media and advertising purposes. Social media and advertising cookies of third parties are used to offer you social media functionalities and personalized ads. Do you accept these cookies and the processing of personal data involved?