32A Single-Phase AC Surge Protector Box
32A Single-Phase AC Surge Protector Box

32A Single-Phase AC Surge Protector Box

$344.8
Tax included
AC32-APR
0768563817434

Enhance the safety of your solar power system with this high-performance 32A AC protection box. Designed for single-phase inverters up to 6.4 kVA, it ensures a safe and compliant connection between your solar power generation and the electricity grid

32A Single-Phase AC Surge Protection Box – 6kVA Photovoltaic Protection


The 32A AC protection box is the central safety component for any residential solar installation up to 6.4 kVA. It provides a secure connection between your photovoltaic inverter and the national grid. This JWUN model incorporates high-quality components to ensure the longevity of your equipment against power surges and insulation faults.





Why choose this AC protection box?

  • High immunity (Type A-APR): The 30mA residual current device (RCD) is specially designed to ignore natural leakage currents from inverters, thereby preventing unwanted power cuts.
  • Certified lightning protection: Equipped with a Citel Type 2 surge arrester (2-pole), it diverts atmospheric surges to protect the inverter’s sensitive electronics.
  • All-Terrain Installation: With its IP65 protection rating, this 6-module enclosure is fully waterproof and can be installed both indoors and outdoors.
  • Ready-to-Install Wiring: Pre-wired with HO7-VK flexible cable, the enclosure facilitates connection thanks to its multi-section earth terminals.





Technical Specifications: Model AC32-APR
Maximum power 6400VA (6.4 kVA)
Residual Current Protection 32A 30mA Type A-APR (Icc 4.5kA)
Surge protector Type 2 - Citel In 20kA / Imax 40kA
Mains output cross-section Up to 16 mm² (Copper only)
Earth terminal block 2x16mm² + 5x10mm²
Enclosure dimensions 231 x 202 x 113 mm (6 modules)
Cable glands included 1xPG21 / 1xPG16 / 4xPG9
Compliance NF standards / National Grid





This enclosure is a pre-wired photovoltaic switching and protection solution, designed to act as an interface between the inverter and the national grid.

Protection components (DIN rail)

  • Main residual current circuit breaker: 32A, 30mA, Type A-APR (High Immunity) with a breaking capacity of 4.5 kA. It protects against current leakage whilst preventing unwanted tripping of the inverter.
  • Type 2 surge arrester: Citel brand, 2-pole (Phase/Neutral), In 20kA – Imax 40kA. It protects the inverter against atmospheric surges.
  • Surge arrester protection: Dedicated 20A circuit breaker (Ph/N) with a breaking capacity of 4.5 kA.

Connection and wiring

  • Internal wiring: Carried out using HO7-VK flexible cable.
  • Earth terminal block: Capacity of 2 x 16 mm² + 5 x 10 mm² to ensure safe earthing of the entire installation.
  • Mains outputs: Terminal block compatible with copper cable up to 16 mm².

Technicalspecifications

  • Enclosure: 6-module box (8 modules with the meter option) with an IP65 protection rating, suitable for outdoor installation.
  • Dimensions: 231 mm x 202 mm x 113 mm.





Wiring diagram for the enclosure

Schéma câblage coffret parafoudre AC 32A mono





FAQ - 32A AC Surge Protector Box (6.4 kVA)

1. Why is the "A-APR" type residual current device essential for my inverter? +
The A-APR (High Immunity) type is specially designed for photovoltaic installations. Inverters naturally generate slight leakage currents which can cause a standard RCD to trip prematurely. This 32A 30mA circuit breaker ignores these parasitic leaks whilst providing genuine protection for people, thereby ensuring the continuity of your solar power generation.
2. What protection does the integrated Citel Type 2 surge arrester offer? +
The Citel surge arrester diverts atmospheric surges (lightning) to earth before they reach the inverter. With a capacity of 20kA (In) and up to 40kA (Imax), it protects your system’s sensitive electronics. It is itself protected by a dedicated 20A circuit breaker, which ensures overall protection is maintained even during maintenance of the surge arrester.
3. Can I install this box outside my home? +
Yes, absolutely. This box has an IP65 protection rating, which means it is completely dust-tight and protected against water jets. It is designed to withstand harsh environments, whether in a damp garage, under a shelter or directly exposed outdoors.
4. What are the connection capacities for earth and the mains supply? +
The enclosure is fitted with a multi-section earth terminal block (2x16mm² + 5x10mm²) to centralise the earthing of the inverter and the structure. For connection to the national grid, the main terminal block accepts copper cable up to 16 mm², ensuring a robust connection that complies with current standards for power ratings up to 6.4 kVA.
AC32-APR

Specific References

UPC
768563817434
EAN13
0768563817434
New

32A Single-Phase AC Surge Protector Box — Mounting and accessories

32A Single-Phase AC Surge Protector Box by Kamase is available in our Mounting and accessories catalog. Product weight: 1.6 kg. Reference: AC32-APR.