Solar controller SRNE MA Series 12/24V 30A MA2430N15
The MA series controller adopts industry-leading MPPT maximum power tracking technology to achieve maximum energy from the solar panel.
SRNE MA2430N15: Intelligent solar charge controller with CAN communication
The MA series controller adopts industry-leading MPPT maximum power tracking technology to achieve maximum energy from the solar panel. It can quickly and accurately track the solar cell's maximum power point in any environment and obtain solar energy in real time. Maximum solar panel energy can dramatically improve the energy utilization rate of the solar system. Widely used in off-grid solar photovoltaic systems, solar panel, battery and load management is the central control component of an off-grid photovoltaic system. Inside the controller, there are perfect software and hardware fault detection and protection functions, which can minimize installation errors and system failures. component damage.
- Using MPPT technology, MPPT tracking efficiency can reach 99.9%.
- Support for CAN communication function (optional).
- Support for a wide variety of batteries such as sealed, colloidal, open type, lithium and user-customized.
- Support for charging voltage line loss compensation, for more precise control of battery charging voltage (partial models).
- Support for capacitive start-up charging and inductive charging.
- RS485 communication supporting standard Modbus protocol, with adjustable baud rate.
- TTL communication supporting standard Modbus protocol, with fixed baud rate.
- With perfect load and discharge protection mechanisms, such as overvoltage, overcurrent, overload, overtemperature and short-circuit.
Data sheet
- Voltage
- 12V / 24V
- Width
- 216 mm
- Height
- 260 mm
- Thickness
- 83.2 mm
- IP protection
- IP32
- MPPT efficiency
- 99%
- Type of cooling
- Natural convection
- Operating temperature Temperature range
- -35℃~ 65℃ (no downgrading below 45℃ with good ventilation)
- Battery Type
- USE/FLD/GEL/LI/SLD (par défaut)
- Rated load current
- 30A
- Maximum PV input current in operation
- 27A
- Maximum solar panel power
- 400W/12V
800W/24V - Static power consumption
- less than or equal to 30mA
- Charge conversion efficiency
- 85%-98%(10%~100% of rated power)
- battery operating voltage range
- 8V-32V
- Maximum PV open-circuit voltage
- 150V
- MPPT point operating voltage range
- (Battery voltage +2)~110V
- Load operating mode
- Light control only, combined light and timer control, manual mode (default), test mode, normally open mode.