0
    Off-grid solar kit MX Flex Protect 100Wp - regulator
    Solar Controller SRNE PWM HP 24V 10A
    Solar panel MX FLEX 100Wp
    Solar Controller SRNE PWM HP 24V 10A
    Solar panel MX FLEX 100Wp

    Off-grid solar kit MX Flex Protect 100Wp - regulator

    $270.7
    033897
    0712971135758

    This kit includes

    • 1XSolar panel 12V MX FLEX PROTECT 100Wp
    • 1XSolar controller MPPT 10A SRNE - MT2410
    • 1X2X4mm2 solar cable with Type MC4 (sold per metre - 2m)
    • 1XBattery cable 2x25mm2 - 2m
    Request a quote

    Select products from the sections below
    Choix des panneaux
    info
    MX FLEX 100Wp PROTECT 12V flexible solar panel
    Solar panel 12V MX FLEX PROTECT 100Wp
    Price per unit
    $179.3  (Tax incl.)
    Choix du régulateur de charge
    info
    Solar controller MPPT 20A SRNE
    Solar controller MPPT 10A SRNE - MT2410
    Price per unit
    $54.7  (Tax incl.)
    Câblage et connectique
    info
    Accessoires batteries
    info
    Battery cable 2x25mm2 - 2m
    Battery cable 2x25mm2 - 2m
    Price per unit
    $27.3  (Tax incl.)
    Choix du système de montage
    info
    No products selected
    No products selected
    Price per unit
    $0.0  (Tax incl.)

    Off-grid solar kit MX Flex...

    $270.7

     " Solar kit MX FLEX protect "

     

     COMPOSITION

     


    Solar panel MX FLEX 100Wp

    Solar panel MX FLEX 100Wp

     

    Flexible MX FLEX 100Wp solar panels are suitable for marine camping or mobile use. You can also use them in other circumstances such as on remote sites or for professional use. 

    Perfect for charging the batteries of your boat, campervan or to feed an autonomous system. Ultra flexible and really light, they are highly resistant to saline environments, wet weather and even trampling! 

    The MXFLEX panel adapt perfectly and easily to wherever you want to place them. Through its flexible and extremely lightweight weight (1.7 Kg), you can easily fix the roof of a boat, the roof of an RV or even the hood of a car ... its limits are those of your imagination.

    The waterproof junction box at the front of the panel and MC4 connectors allow you to connect quickly and easily.

     

     

    back contact monocrystalline cells

     

    With its back contact monocrystalline cells with high efficiency (22%), the FLEX MX panels integrate the best in terms of photovoltaic technology!

    The cells optimize the performance of the panel when it is in low light conditions, maximizing the performance of the panel by bad weather.

    The fastening points located on the four corners allow you to fix it easily everywhere.

     

     

     

     

     

     

    • Power: 100Wp
    • Voltage by max. power: 19,8 V
    • Open circuit voltage: 23,4V
    • Intensity by max. power: 5,05A
    • Dimensions: 1185 x 540 x 3 mm
    • Weight: 1.7 Kg

    EPEVER LS1024 LANDSTAR PWM 12V / 24V - 10AEPEVER LS1024 LANDSTAR PWM 12V / 24V - 10A

     

    Adopts an aluminum heat sink that allows high reliability in high temperature environments.
    PWM solar regulators protect your batteries from discharge and overload, ensuring that their lifespan is optimized.

     

    The model 10A (LS1024B) can accommodate up to 250 watts of solar panels * 


    Capacity: 10, 20 or 30 amps.
    Tension: 12v or 24V
    Temperature compensation 
    2-year warranty.
    Technology: 'linkpopup id'pwm'.
    Fully programmable if used with its display

    All load voltages can be changed between 9 and 17V (X2 for 24V), disconnection voltage also.
    Programming the consumer output in a day/night or hourly mode.
     

    In a 24V system

     

    Technical data

     

     

    ModelLS1024B
    Nominal system tension12/24VDC12/24VDC
    Rated battery current10A
    Maximum PV input voltage40w
    Self-sommation8.4mA (12V)?7.8mA (24V)
    Temperature compensation-3mV/?/2V?25? Ref?
    Equalizing load voltageSealed: 14.6V, open: 14.8V, User: 9-17V
    Increased load voltageGel: 14.2V, Sealed: 14.6V, open: 14.8V, User: 9-17V
    Floating charge voltageFreeze /Sealed /open: 13.8V, User: 9-17V
    Reconnection tensionFreeze /Sealed /open: 12.6V, User: 9-17V
    disconnection tensionFreeze /Sealed /open: 11.1V, User: 9-17V
    Size138.6x69.3x37mm
    Mounting holes126mm
    Terminal4mm2
    Weight0.13kg
    Running temperature-35?
    Storage temperature-35?
    Humidity?95% (NC)
    StandardIP30
    033897

    Data sheet

    Inverter power
    - de 1000VA
    Kit output voltage
    230V
    Battery storage
    Without storage
    Wind turbine
    Without
    Number of panels
    1 panel
    Voltage
    12V
    Battery
    Kit with battery
    Mains re-injection
    off-grid

    Specific References

    New

    Download

    Datasheet Epsolar Landstar EN

    Download (671.22KB)

    Manual Epsolar Landstar EN

    Download (389.72KB)

    Manuel Epsolar Landstar FR

    Download (510.78KB)

    You might also like