Twerd 10kW wind inverter injection network
CHF5,145.74
Tax included
Twerd-mono-10kw
0768563817205
is a single-phase output inverter intended for use
with small wind power plants based on permanent magnet generators.
⚡
Combien allez-vous économiser ?
Simulez vos économies
avec ce kit de 6 kWc
EOLIEN INVERTER 10Kw INJECTION RESEAU
is a single-phase output inverter intended to be used with small wind power plants based on permanent magnet generators.
Protections
Anti-island detection; protection against short circuits and surges
Under-voltage on the power grid
Thermal protection
Characteristics
| Entry (generator side) | |
| Generator type: |
permanent synchronous generator magnet
|
| power | 10 kW |
| Nominal tension | 3 x 400 Vac |
| Tension range | 3 x 100-550 Vac |
| Maximum current | 20A |
| Exit (electric grid side) | |
| tension | 3 x 400 Vac |
| The frequency |
50 Hz (-2.5 Hz .. 1.5 Hz)
|
| Nominal power | 10,000 W |
| Nominal current | 14.5 A |
| Total harmonic distortion factor for the output current (THDi): | <3% |
| Energy consumption in standby mode | 2 W |
| General features | |
| Maximum efficiency | 97,00% |
| overloading | 110,00% |
| type |
On network, off-grid (with additional module)
|
| Digital outputs (relays): | 3 |
| Digital entries | 5 |
| communication |
Ethernet, Modbus RTU (RS-485)
|
| Protection index | IP65 |
| Dimensions (width x height x depth) |
338x433x183 mm
|
| weight | 14 kg |
Twerd-mono-10kw
Data sheet
- Wind turbine
- With
- Voltage
- 12V / 24V
- Power
- 300 VA
Specific References
- UPC
- 768563817205
- EAN13
- 0768563817205
New
Twerd 10kW wind inverter injection network — Self-consumption solar kits
Twerd 10kW wind inverter injection network is available in our Self-consumption solar kits catalog. Technical specifications: wind turbine: With, voltage: 12V / 24V, power: 300 VA. Product weight: 14.0 kg. Reference: Twerd-mono-10kw.
