Battery box with automatic fuse 2X 125A DC 250V + cables
Battery box with automatic fuse 2X 125A DC 250V + cables — vue 2
Battery box with automatic fuse 2X 125A DC 250V + cables — vue 3
Battery box with automatic fuse 2X 125A DC 250V + cables — vue 4
Battery box with automatic fuse 2X 125A DC 250V + cables
Battery box with automatic fuse 2X 125A DC 250V + cables — vue 2
Battery box with automatic fuse 2X 125A DC 250V + cables — vue 3
Battery box with automatic fuse 2X 125A DC 250V + cables — vue 4

Battery box with automatic fuse 2X 125A DC 250V + cables

€180.77
Tax included
Cof-Fusible-2X-125ADC-250V
0768563822902

Double fuse DC box 125 A – 250 V with four 35 mm² battery cables (1 m), two 35 mm² battery cables (2 m) and pre-installed terminals. Ready to connect, it protects two lithium or lead battery lines against overloads and short circuits.

7

Box with 2 125 A – 250 V DC Fuses + 35 mm² Battery Cables and Terminals


This complete 125 A DC double fuse box comes with everything you need to connect it to your solar batteries straight away. It includes 2 class T 125 A – 250 V DC automatic fuses to protect two separate lines, as well as 4 35 mm² battery cables (each 1 m long) with pre-installed terminals.

It is suitable for all lithium (LiFePO4, NMC), lead-acid, AGM or gel solar batteries up to 250 V DC. This box is a turnkey protection solution, designed to limit the risk of short circuits or overloads, while facilitating the connection of your solar equipment. Wall mounting. Ideal for residential, stand-alone or industrial installations.





Advantages

  • Double DC protection: 2 automatic fuses 125 A – 250 V DC, class T
  • Cabling included: 4 x 35 mm² battery cables (1 m each) with 35 mm terminals + 2 x 35 mm² battery cables (2 m each) with 35 mm terminals
  • Universal compatibility: lithium, lead-acid, LiFePO4 and gel batteries
  • Ready to use: pre-wired box, +/− terminal blocks, cable ducts, screws





Installation tips

  • Use the supplied cables to connect the box directly to your batteries.
  • Secure the box to the wall.
  • Always check the polarity before switching on the power.
  • If necessary, secure the terminals to the battery terminal with a torque wrench.





FAQ – FREQUENTLY ASKED QUESTIONS

1. Is this box really ready to plug in? +
Yes! It includes 4 battery cables (1 m – 35 mm²) and pre-crimped terminals. You can therefore connect it to your battery bank immediately upon receipt.
2. What type of batteries is it designed for? +
It is compatible with all batteries up to 250 V DC: lithium (LiFePO4, NMC), lead, AGM, gel, etc.
3. Is it a circuit breaker? +
No. These are fast-acting automatic fuses, specially designed for immediate and safe shutdown in the event of overcurrent in a DC circuit.
4. Where should it be installed? +
It must be installed as close as possible to the battery. It effectively protects the main DC line or two separate circuits, depending on your needs.
Cof-Fusible-2X-125ADC-250V

Specific References

UPC
768563822902
EAN13
0768563822902
New

Battery box with automatic fuse 2X 125A DC 250V + cables — Mounting and accessories

Battery box with automatic fuse 2X 125A DC 250V + cables by Wattuneed is available in our Mounting and accessories catalog. Product weight: 2.0 kg. Reference: Cof-Fusible-2X-125ADC-250V.