ZJBENY AC 16-25A 230V IP65 lightning arrester cabinet
Designed for residential photovoltaic installations, this ZJBENY BBWx-1 single-phase AC surge protector offers Type 2 (20-40 kA) protection against overvoltages, ensuring the safety of equipment connected to the 230 V network. It incorporates an adjustable 16/20/25 A circuit breaker for protection that can be adapted to suit your installation. Its robust, UV-resistant IP65 enclosure guarantees reliable, long-lasting outdoor use, even in demanding climatic conditions. A complete, safe and high-performance solution for securing your solar systems.
Compatible avec :
ZJBENY AC 16A/20A/25A 230V Lightning Arrester Box - Complete Protection for Photovoltaic Installations
The ZJBENY BBWx-1 lightning protection cabinet is a compact, robust electrical protection solution designed to protect your single-phase photovoltaic installations against overvoltages and voltage peaks. Equipped with Type 2 lightning protection and an adjustable circuit breaker, this IP65 enclosure is ideal for outdoor residential and commercial installations.
Advanced surge protection
This enclosure incorporates a Type 2 lightning arrester designed to absorb transient overvoltages of up to 40kA (Imax) and provide nominal protection of 20kA (In). The AC275V protection level guarantees the safety of your sensitive equipment: hybrid inverters, micro-inverters and electronic devices connected to the photovoltaic grid.
Type 2: Compliant with standard EN 62305, this type of surge protector is specifically recommended for photovoltaic installations downstream of the main switchboard. It provides effective protection against lightning-induced surges and mains switching.
Adjustable, versatile circuit breaker
The ZJBENY BBWx-1 box has an adjustable AC circuit breaker with three protection ratings:
- 16A: Suitable for single-phase inverters up to 3.6 kVA
- 20A: For inverters from 3.6 to 4.6 kVA
- 25A: Suitable for inverters up to 5.5 kVA
This flexibility means you can adapt the protection to the exact power of your installation without costly oversizing.
IP65 enclosure: Robustness in outdoor conditions
Designed for outdoor installation, the enclosure has an IP65 protection rating, guaranteeing :
- Total dust tightness (IP6x)
- Protection against water jets from all angles (IPx5)
- UV resistance for maximum durability in sunlight
Cable entries and exits use PG13.5 cable glands for perfect sealing and professional assembly. The compact 197×210×120 mm dimensions make it easy to integrate into existing electrical cabinets or to mount on a free-standing wall.
Applications and compatibility
The ZJBENY AC surge protector is particularly suitable for :
- Protection of single-phase hybrid inverters (Deye, WKS, Sofar, Huawei, Victron)
- Residential installations from 3 to 6 kWp
- Stand-alone systems with battery storage
- Single-phasemicro and stringinverters
- AC input/output protection in complex configurations
To find out more about the importance of surge protectors in photovoltaic installations, see our technical guide to surge protection.
Installation and use
The box is easy to install thanks to its integrated wall fixings. The recommended typical installation is as follows:
- Upstream: Type A 30mA earth leakage circuit breaker
- ZJBENY BBWx-1 box: Lightning protection + calibrated circuit breaker
- Downstream: Connection to inverter or AC distribution board
Connection to earth (PE terminal) is imperative to ensure the effectiveness of the surge arrester. Use an earth cable cross-section at least equal to the active conductors (L/N), with a length as short as possible (ideally ≤ 50 cm).
| Puissance Onduleur | Calibre Disjoncteur | Section Câble Recommandée |
|---|---|---|
| Jusqu'à 3,6 kVA | 16A | 2,5 mm² |
| 3,6 à 4,6 kVA | 20A | 4 mm² |
| 4,6 à 5,5 kVA | 25A | 6 mm² |
Advantages of the ZJBENY BBWx-1 enclosure
- Certified Type 2 protection: 20kA nominal / 40kA maximum
- 3-position circuit breaker: Adaptable to different power ratings
- IP65 enclosure: stress-free outdoor installation
- UV resistance: Long-lasting durability
- Sealed inputs/outputs: PG13.5 cable gland
- Compact and lightweight: optimised dimensions
- Standards compliance: EN 62305 for PV installations
Maintenance and checks
To ensure optimum protection over time, carry out the following checks:
- Monthly: Visual check of enclosure integrity
- Quarterly: Circuit-breaker test (manual tripping)
- Annually: Tighten terminals and inspect connections
- After a violent storm: Lightning arrester check (preventive replacement if necessary)
Use our photovoltaic sizing calculator to check compatibility with your existing installation.
Warranty and technical support
The ZJBENY BBWx-1 lightning arrester is covered by a 2-year manufacturer's warranty. Our Wattuneed technical team is at your disposal for any installation or sizing advice via our online support platform.
Data sheet
- Type of electrical equipment
- Coffret
- Protection AC - Rated current (A)
- 25 A
- Protection AC - Rated voltage (V)
- 230 V
- Protection AC - Poles
- 1P+N
Specific References
- UPC
- 768563817984
- EAN13
- 0768563817984
ZJBENY AC 16-25A 230V IP65 lightning arrester cabinet — Mounting and accessories
ZJBENY AC 16-25A 230V IP65 lightning arrester cabinet by Wattuneed is available in our Mounting and accessories catalog. Technical specifications: type of electrical equipment: Coffret, protection ac - rated current (a): 25 A, protection ac - rated voltage (v): 230 V, protection ac - poles: 1P+N. Product weight: 0.5 kg. Reference: ZJBENY-AC-230.