AC-Coupled Inverter SolaX X1 Retro Fit Single-Phase 5 kW – X1-FIT-5.0-W
CHF1,482.51
Tax included
X1-FIT-5.0-W
0768563815966
Solax X1 Retro Fit: Your Energy Independence Assurance
The Solax X1 Retro Fit is more than just an inverter. It’s a smart solution that allows you to make the most of your solar installation. By storing excess energy produced by your photovoltaic panels, this device ensures a continuous power supply, even in the event of a grid outage.
Why Choose the Solax X1 Retro Fit?
- Flexibility: Compatible with most existing solar inverters, it easily adapts to your current setup.
- Independence: In the event of a power outage, the energy stored in your battery powers your home, ensuring comfort.
- Easy Installation: With its IP65 rating, it can be installed indoors or outdoors.
- Optimization: Maximize your self-consumption by using solar energy when you need it.
Key Advantages:
- Energy Security: No longer be dependent on the power grid.
- Savings: Reduce your electricity bill by consuming the energy you produce.
- Eco-friendly: Lower your carbon footprint by using clean energy.
Ready to take the step towards energy independence?
The Solax X1 Retro Fit is the ideal solution to optimize your solar installation and secure your power supply. Contact us for a personalized quote.
SolaX X1 Retro Fit solar inverter: Simplify your energy transition
SolaX Power is pleased to announce the release of its new X1 Retro Fit charger. Generate energy from your solar panels during the day. Once the background charge has been satisfied, the intelligent SolaX X1 Retro Fit charger will direct the excess energy to your battery for further use. So you can make the most of the energy you produce. If your home suffers a power cut, the X1 Retro Fit sends the stored energy back home, so you're never left in the dark, even during a power cut. Compatible with all inverter manufacturers, the X1 Retro Fit charger is the perfect upgrade for your system.
Add to existing PV systems
The SolaX X1 Retro-Fit can be installed alongside any string inverter on the market today, allowing you to switch to solar battery storage without changing your existing installation. You also benefit from the added advantage of a backup power supply, enabling you to stay powered during a power cut.
Never lose power
With the SolaX X1 Retro-Fit, you can be sure you'll never be without power, even during a power cut. A backup power supply or "EPS" switch (only available on "E" models) allows the X1 Retro-fit to operate completely off-grid, meaning that all the energy you've stored on your batteries will now be used in the event of a power cut.
Indoor or outdoor installation
The X1 Retro-Fit is IP65-rated, which means it can be installed indoors or outdoors, giving you the choice of where to install the system.
Features
Password to enter parameters: 2014
| AC | |
| OUTPUT | |
| Rated AC power (VA) |
| 4999 |
| Max. AC power (VA) (VA) |
| 4999 |
| Nominal mains voltage (AC voltage range) (V) |
| 220/230/240 (180 - 270) |
| Nominal ma |
| ins frequency/range (Hz |
| 50/60 |
| Nominal AC current (A) | 21,7 |
| (A) | 21.7 |
| Displacement power factor |
| .8 leading to 0.8 trailing |
| THDi, rated power(%) | <2 |
| AC INPUT |
| Max. AC apparent power [VA] |
| Max. | AC current [A] | 21,7 |
| Nominal mains voltage(AC voltage range) [V] | 220/230/240 (180 - 270) |
| Nominal mains frequency/frequency range | |
| Hz] | 50/60 |
| BATTERY |
| Battery voltage range [V] | 85 - 400 |
| Recommended battery voltage [V] | 300 |
| Continuous charge/discharge current max. | 20 |
| ommunication interfaces | CAN / RS485 |
| Reverse connection protection | Yes |
| OFF-GRADE |
| (WITH BATTERY) |
| MAX. apparent power. | |
| continuous [VA] | 600 |
| Nominal voltage [V],Frequency [Hz] | 230, 50/60 |
| MAX. continuous current | 26 |
| eak apparent power [VA] |
| Switching time [ms] | <500 |
| THDv, linear load [%] | <2 |
| Switching device | External |
| EFFICIENCY |
| Max. | |
| Battery charging efficiency (GRID to BAT) | 95,60 |
| Max. efficiency | |
| to BAT | |
| Battery discharge efficiency (BAT to AC) | 97,00 |
| POWER CONSUMPTION |
| Standby power consumption (Night) [W] | <15 for warm standby, <3 for cold standby |
| AND PROTECTION |
| Overvoltage and undervoltage protectionvoltages | Yes |
| Ground fault protection monitoring | Yes |
| Mains protection | Yes |
| STANDARD |
| Safety | IEC61407 |
| EN 61000-6-1 / EN 61000-6-2 / EN 61000-6-3 |
| Certification |
| 0126-1-1 A1:2012 / VDE-AR-N 4105 /G99 / G98 / AS4777 / EN50549/ IEC 0-21 / VDE 2510 / etc. |
| NVIRONMENTAL LIMIT |
| Degree of protection (to IEC60529) | IP65 |
| Operating temperature range [°C] |
| ~ +60 (derating to +45) |
| Maximum operating altitude [m] | <2000 |
| Humidity [%] |
| (condensation) |
| Storage temperature [°C] |
| 20 ~ +60 |
| Typical noise emission [dB] | 40 |
| DIMENSIONS AND WEIGHT |
| Dimensions [mm] | 476 x 464 x 180 |
| Weight [kg] | 23 |
| Cooling concept | Natural |
| Topology | Non-isolated |
| Communication interfaces | Ethernet |
| Pocket WiFi (optional) Pocket LAN (optional) Pocket GPRS (optional) DRM USB ISO alarm CT |
| LCD display | Yes |
| Standard warranty [yr] |
X1-FIT-5.0-W
Data sheet
- Inverter power in VA
- 5000 VA
- MPPT/PWM
- MPPT
- Phase
- Monophasé
- Width
- 464 mm
- Height
- 476 mm
- Thickness
- 180 mm
- Weight
- 23 kg
- Video Youtube 1 - ID
- Et8WfdYeiiA
Specific References
- UPC
- 768563815966
- EAN13
- 0768563815966
New
AC-Coupled Inverter SolaX X1 Retro Fit Single-Phase 5 kW – X1-FIT-5.0-W — Inverters and converters
AC-Coupled Inverter SolaX X1 Retro Fit Single-Phase 5 kW – X1-FIT-5.0-W by SolaX is available in our Inverters and converters catalog. Technical specifications: inverter power in va: 5000 VA, mppt/pwm: MPPT, phase: Monophasé, width: 464 mm, height: 476 mm, thickness: 180 mm, weight: 23 kg, video youtube 1 - id: Et8WfdYeiiA. Product weight: 23.0 kg. Reference: X1-FIT-5.0-W.
