SOC Monitor PowerTech
CFA271,758.36
Tax included
SOC-Powertech
0768563818790
The PowerTech SOC Monitor is an advanced monitoring tool designed for lithium storage systems. This product is a state of charge monitor that measures voltage, current and SOC with surgical precision thanks to its integrated 0.2 milliohm shunt, surpassing standard Hall effect sensors.
This accessory is specifically compatible with PowerBrick series batteries and 12V to 48V nominal systems. This device optimises energy management by integrating with your installation via its isolated CAN bus (2.5kV), RS485 (Modbus), RS232 and Bluetooth 4.2 protocols. It provides real-time monitoring, which is essential for the longevity of lithium cells.
Designed for demanding environments, it allows direct reading of the capacity used with a calculation every 100 ms. Its compact size (56 x 113 mm) makes it easy to install in the technical boxes of recreational vehicles or autonomous solar installations.
- Accuracy: 20 mV voltage resolution and measurement up to 100 A (expandable via external shunt).
- Multi-protocol: TTL, I2C, CAN and Bluetooth Low Energy interfaces for total supervision.
- Thermal management: Dedicated thermistor input for critical temperature control.
- Efficiency: Ultra-low power consumption (max 17mA) to avoid draining the battery bank.
EAN: 0768563818790
⚡
Combien allez-vous économiser ?
Simulez vos économies
avec ce kit de 6 kWc
SOC Monitor PowerTech
The SOC Monitor is a monitoring device for lithium batteries. It incorporates a precision shunt (0.2 milliohm) that provides better accuracy than Hall-effect sensors. This device can be used to measure voltage and current with great accuracy and estimate the SOC (State of charge) of a battery with great accuracy. battery with great precision.
All information (tension, current, SOC) is sent to an external controller via several communication protocols. external controller. Settings such as the rated capacity of the battery can be configured by sending a simple command to the device.
Features
Measuring the current
The device incorporates a high-precision shunt resistance that allows you to measure both small currents and larger ones.
bigger. For greater accuracy, the software calibrates the current on small and large currents.
Current.
If the current to be measured is greater than 100A, it is possible to connect an external shunt resistance through the connector.
through the connector.
Measuring battery voltage
The device measures the battery voltage every second. Good precision is achieved by calibrating the two voltage measurements, large and small.
Measuring temperature
The monitor can measure an external temperature. In this case, a "thermistance" must be plugged into the "THERMISTOR" connector.
communication
Several means of communication are integrated into the SOC Monitor:
Insulated CAN Bus (2.5kV)
I2C
LED display (SOC information only)
PWM (SOC information only)
Port series:
RS232 (switch to position 232/485).
RS485 (MODBUS switch on position 232/485).
Bluetooth (switch on the BLE position).
TTL (switch on TTL position).
size
Characteristics
| Battery type |
12V - 24V - 36V - 48V
|
| consumption | 5.6mA - 17mA |
| Current measurement range |
0 - 100A with internal Shunt
>100A with external Shunt |
| Tension measurement range | 5.5V - 60V |
| Tension resolution | 20mV |
| Power resolution |
10mA (0-10A) and 100mA (10A-100A)
|
| Time information range |
0 minute - 255 hours 59 minutes
|
| Message delivery period |
1s: TTL / RS232 /Bluetooth /CAN_ISO
(The settings can be changed) On request: MODBUS |
| Time between messages |
10ms: TTL / RS232 / Bluetooth
1s: CAN_ISO (Parameter can be modified) |
| Timer calculates the capacity used |
Every 100 ms
|
| Power connector |
2 M8 connectors welded to pcB
|
| Power connector |
1 connector with 2 contacts "ALIM
|
| Port RS232 |
1 "RS232" 3-contact connector.
|
| Port RS485 |
1 "RS485" 3-contact connector.
|
| Isolated PORT CAN (2.5kV) |
1 connector with 3 "CAN" contacts
|
| Port TTL |
1 connector with 3 "TTL" contacts
|
| Port I2C |
1 connector with 2 "I2C" contacts.
|
| Thermistance entrance |
1 connector with 2 "THERMISTOR" contacts.
|
| Input external shunt resistance |
1 connector with 2 "SHUNT EXT" contacts.
|
| bluetooth |
Low-energy V4.2
|
| dimension | 56 × 113 mm |
SOC-Powertech
Data sheet
- Type of electrical equipment
- Porte-fusible DC
Specific References
- UPC
- 768563818790
- EAN13
- 0768563818790
New
You might also like
SOC Monitor PowerTech — Battery Accessories
SOC Monitor PowerTech by Wattuneed is available in our Battery Accessories catalog. Technical specifications: type of electrical equipment: Porte-fusible DC. Product weight: 0.1 kg. Reference: SOC-Powertech.
