Victron Phoenix VE.Direct 12/24/48V - 800VA View full size

Victron Phoenix VE.Direct 12/24/48V - 800VA

Victron energy

338,80 € tax incl.


Pure Sine Wave Inverter Victron Phoenix 12/24/48/800VA

Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications.

Logo Victron

More details

More info



VE.Direct communication port

The VE.Direct port can be connected to:
• A computer (VE.Direct to USB interface cable needed)
• Apple and Android smartphones, tablets and other devices (VE.Direct to Bluetooth Smart dongle needed)


Fully configurable

• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels
• Output voltage 210 - 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sense level



Battery voltage, AC Output voltage and current, alarms


Proven reliability

The full bridge with toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.


High start-up power

Needed to start loads such as power converters for LED lamps, filament lamps or electric tools.


ECO mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. It will switch on and check every few seconds, adjustable, if the load has increased again.


Remote on/off connector

A remote on/off switch can be connected to a two pole connector or between battery plus and the left hand contact of the two pole connector.


LED diagnosis

A red and a green LED indicate inverter operation and status of the different protections.


To transfer the load to another AC source: the automatic transfer switch

For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.


Phoenix Inverter12V / 800
24V / 800
48V / 800
Cont. power at 25°C (1)800 VA
Cont. power at 25°C / 40°C650 / 560 W
Peak power1500 W
Output AC voltage / frequency (adjustable)230 VCA ou 120 VCA +/- 3 % 50 Hz ou 60 Hz +/- 0,1 %
Input voltage range9,2 - 17 V
18,4 - 34,0 V
36,8 - 62,0 V
Low battery shut down (adjustable)9,3 V
18,6 V
37,2 V
Low battery restart & alarm (adjustable)10,9V
Battery charged detect (adjustable)14,0V
Maximal efficiency90 %
90 %
91 %
Zero-load power6,5 W
7 W
9,5 W
Default zero-load power in ECO mode (default search interval: 2,5 s, adjustable)1
ECO mode stop and start power settingAdjustable
Protectiona) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) DC ripple too high
Operating temperature range-40 to +60°C (fan assisted cooling) (derate 1,25% per °C above 40°C)
Humidity (non-condensing)max 95%
Material & ColourChâssis en acier et couverture en plastique (Bleu RAL 5012)
Battery-connectionScrew terminals
Maximum cable cross-section25 / 10 / 10 mm² / AWG4 / 8 / 8
Standard AC outlets230 V : Schuko (CEE 7/4), IEC-320 (male plug included) UK (BS 1363), AU/NZ (AS/NZS 3112) 120 V : Nema 5-15R
Protection categoryIP 21
Weight5,5 kg
Dimensions (HxWxD, mm)105 x 216 x 305 (12 V model : 105 x 230 x 325)
Remote on-offOui
Automatic transfer switchFIlax
SafetyEN-IEC 60335-1 / EN-IEC 62109-1
EMCEN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
Automotive DirectiveECE R10-4
1) Nonlinear load, crest factor 3:1 



Inverter power- de 1000VA