9-panel 6.5kVA self-consumption kit with storage
9-panel 6.5kVA self-consumption kit with storage
9-panel 6.5kVA self-consumption kit with storage
9-panel 6.5kVA self-consumption kit with storage
9-panel 6.5kVA self-consumption kit with storage
9-panel 6.5kVA self-consumption kit with storage
9-panel 6.5kVA self-consumption kit with storage

9-panel 6.5kVA self-consumption kit with storage

€3,403.71
Tax included
config-ac-9pan-5kva
0712971136663

Hybrid Solar Kit: Autonomy and Savings

Dive into energy autonomy with our complete hybrid solar kit! This innovative system combines solar power generation, battery storage and intelligent energy management.

Key benefits :

  • Autonomy: Use your solar energy whenever you want, even when the sun is not shining.
  • Savings: Drastically reduce your electricity bill.
  • Reliability: Quality equipment for stable, sustainable production.
  • Intelligent management: The WKS Evo Circle hybrid inverter optimises your energy consumption.

Production and savings:

With its 9 x 450Wp solar panels, this kit produces around 4,455 kWh/year (estimate for central France). This represents potential savings of around €1,336.50 per year (based on an electricity price of €0.30/kWh).

Why choose this kit?

  • Hybrid technology : The WKS Evo Circle Pro inverter guarantees you energy independence.
  • High-performance storage: Ultracell GEL batteries store excess energy.
  • Complete installation: All the necessary components are included.

Customisation:

Adapt your installation to your needs. Contact us for a personalised study.

Ready to go independent? Ask for your free quote!

This kit includes

  • 9XLeapton N-Type 450Wp TOPCon bifacial | Solar Panel Optimized Solar Output
  • 1XWKS Evo Circle PRO 6.5 kVA 48V Hybrid Inverter | Innovation and Performance
  • 1X2X4mm2 solar cable with MC4 type (sold per metre)
  • 1X6mm² earth cable (sold by the meter)
  • 4XGEL Ultracell 12V 200Ah battery
  • 1XBattery cable 2x25mm2 - 2m
  • 3X25mm² battery junction with terminals
  • 1XFuse box for battery - Coffret avec fusible pour batterie -100A
  • 2XCircuit breaker Schneider mono 32A
  • 1XZJBENY DC single 1 input and 1 output 1000V 32A surge protection cabinet
Request a quote

Select products from the sections below
Panneaux
info
Choix de l'onduleur
info
Choix du système de montage
info
No product selected
No products selected
Price per unit
€0.00  (Tax incl.)
Câblage et connectique
info
2X4mm² Solar cable with MC4 (by the metre)
2X4mm2 solar cable with MC4 type (sold per metre)
Price per unit
€59.29  (Tax incl.)

Cable length

Câblage et connectique
info
6mm² earth cable (sold by the meter)
6mm² earth cable (sold by the meter)
Price per unit
€50.60  (Tax incl.)

Earth cable

Choix des batteries
info
GEL Ultracell 12V 200Ah battery
GEL Ultracell 12V 200Ah battery
Price per unit
€331.00  (Tax incl.)
Accessoires batteries
info
Battery cable 2x25mm2 - 2m
Battery cable 2x25mm2 - 2m
Price per unit
€48.25  (Tax incl.)
Accessoires batteries
info
Jonctions batteries 25mm²
25mm² battery junction with terminals
Price per unit
€9.27  (Tax incl.)

Cable length

Accessoires batteries
info
Protections et accessoires AC
info
Circuit breaker Schneider mono 10A
Circuit breaker Schneider mono 32A
Price per unit
€20.00  (Tax incl.)
Protections et accessoires DC
info
Choix du groupe électrogène
info
No product selected
No products selected
Price per unit
€0.00  (Tax incl.)

Benefit from sustainable energy at your fingertips with our solar kit, combining simplicity and efficiency.


Choose from a range of options to create an energy system that's just right for you. Whether you're looking to power an isolated site or a stand-alone installation, this kit has been designed to do just that.


It can operate alternately with the public grid or with a generator.
This semi-autonomous configuration will enable you to gradually free yourself from the public grid.

The basic kit contains 9 solar panels, a WKS Evo Circle Pro 6.5 kVA 48V hybrid inverter, four 200Ah ultracell batteries, solar cables to connect the panels to the inverter, and the panel mounting system is available as an option. (The mounting system as well as the cabling and protections can be modified to suit your needs).

All our kits are configurable. In the options you can click on the product to choose another model or change the quantities to adapt the kit to your needs. You can also see details of the products you have chosen directly below the price.

Image presentation -panneaux





Solar panels

Selected from the latest technologies, this panel offers unrivalled efficiency.

See its product sheet in our panels section to find out more.

And don't forget, we offer you the flexibility to choose the panel model you prefer.

We invite you to consult our solar production simulator to find out exactly what your solar production will be.



Different types of cells


Icone cellule

Perc
(Passivated Emitter and Rear Cell)

Icone cellule

N-Type

Icone cellule

HJT

Efficacité

Efficiency

Approximately 19-22 Approx. 20-23 Approximately 21-24

icone euro

Cost

Moderate High Very high

Icone température

Temperature coefficient

Approximately

-0.3 to 0.4% per °C
Approx.

-0.3% per °C
Approximately

-0.2% per °C

Icone dégradation

Annual degradation

Approx. 0.5 - 07 Approximately 0.4 - 0.5% Less than 0.5% per year

icone durabilité

Durability

Good Very good Excellent

See panels






WKS Evo Circle Pro

WKS Evo Circle PRO 6.5 kVA - 48 V Hybrid Inverter: Performance, Reliability and Intelligent Management


The WKS Evo Circle PRO 6.5 kVA / 48 V inverter is the ideal technical solution for a stand-alone or hybrid solar system. It combines power with intelligent energy management and ensures a stable power supply thanks to its UPS (emergency) function with rapid changeover (10 to 20 ms depending on the mode).

It has two programmable AC outputs:

  • Advantage: Output 1 (priority) is dedicated to critical loads (PC, fridge, lights), and output 2 (secondary) to non-essential loads (water heater, EV charging). Output 2 can be intelligently offloaded to guarantee the autonomy of critical appliances.

Equipped with a 120 A MPPT regulator, it optimises photovoltaic production up to 9,000 Wp. Designed for 48 V batteries, it is compatible with LiFePO₄ lithium batteries.

Its all-in-one design (inverter + charger + controller) simplifies installation. Wi-Fi connectivity and the dedicated mobile app (iSolar/WatchPower) enable remote control.

For larger projects, it can be upgraded to 6 units in parallel (single-phase or three-phase) for a total output of 39 kW.

Key technical features:

  • Power output: 6,500 W / 6.5 kVA
  • AC outputs: 2 (programmable, 1 priority / 1 secondary)
  • Max PV input: 9,000 W
  • MPPT range: 90 - 450 VDC
  • Number of MPPT trackers: 1
  • MPPT charging current: 120 A
  • Battery voltage: 48 V (Pylontech compatible)
  • UPS mode (standby) : 10 ms / 20 ms transfer
  • Connectivity: Wi-Fi + Mobile application
  • Scalability: Parallel connection of up to 6 inverters






video

A collection of videos to help you understand everything

Theme Objective / Benefit
Technical labels icone Decoding inverter information to make the right choice
Measuring DC voltage icone Using a voltmeter to measure DC current
Protection box Icone Securing your installation: differential + earth
Connecting inverters and Pylontech batteries icones Optimising installation and wiring
Lightning protection box (polarity) icones Avoid polarity reversal
Lightning arrester box (earthing) Icone Understanding earthing
Connecting panels to an inverter IconeMaximising solar yield
AC IN/OUT connection icones Correct electrical connection
AC wiring (neutral/phase) icones Secure AC installation
Pylontech battery → WKS Circle inverter icone Ensure optimum performance
Communication cable icone Reliable system connection
Inverter pre-start icone Pre-launch checks
Inverter-powered circuits icone Ensuring correct operation & safety
Standard hybrid inverter start-up icone Understanding indications & voltage
Basic UPS + lithium battery parameters icone Optimising settings & performance




Batterie Ultracell Gel 200Ah

GEL Ultracell 12V 200Ah battery

Gel batteries are sealed batteries: no maintenance, no need to add distilled water. Greater safety than open lead batteries.

A Gel battery can withstand a 100% discharge and recover its rated capacity if the discharge holding time is short. This series has a longer discharge time than other batteries. Its special plate design increases battery life, particularly in warmer temperatures. A separator within the battery improves its performance. It also has a longer shelf life.






illustration famille devant une installation photovoltaïque

Possible uses & needs covered

Single-family home connected to the grid

Thanks to its power and storage capacity, this kit can cover a large proportion of daily consumption: lighting, household appliances, multimedia, small electrical appliances. It also provides back-up in the event of a power cut.

Isolated or semi-isolated house

The kit provides a stable power supply for homes in areas where the grid is absent or unreliable. The hybrid inverter and battery ensure continuity even during prolonged interruptions.

Second home / leisure home

Perfect for powering homes used only occasionally: cottages, holiday homes, occasional residences. It keeps subscription and connection costs to a minimum while guaranteeing comfortable autonomy.

Utility room / light workshop

Ideal for lighting, tools for moderate use, small electrical appliances or surveillance systems. Perfect for a workshop or technical room that doesn't require a lot of power.

Back-up mode / emergency inverter

In the event of a mains failure, the system automatically switches to battery power, ensuring that essential circuits in the home continue to be supplied.

Step towards a larger installation

This kit provides a scalable base: panels or batteries can be added according to the inverter's capacity, to support future increases in demand.

config-ac-9pan-5kva

Data sheet

Solar kit type
Kit 230V AC avec batterie
Inverter power
5000VA
Kit output voltage
230V
Type of need
Self-consumption
Battery storage
With storage
Wind turbine
Without
Number of panels
9 panels
Voltage
230V
Battery
Kit with battery
Panel type
Rigids
Mains re-injection
off-grid

Specific References

UPC
712971136663
EAN13
0712971136663
New
MCU Update Procedure for Inverters - Corrected Version

MCU Update Procedure for Inverters

Professional Version - Technical Document

Introduction

This document details the complete procedure for performing a Microcontroller (MCU) update on inverters. This operation is essential to maintain optimal equipment performance and integrate the latest software improvements.

A correctly performed update ensures proper inverter operation and extends its lifespan. It is crucial to follow this procedure step by step to avoid any malfunction.

Safety Warnings

CRITICAL ATTENTION

An interrupted update can render the inverter unusable.

Do not disconnect power from the computer or inverter during the procedure.

Avoid putting the computer to sleep during the update.

Ensure your computer battery is sufficiently charged or the computer is plugged into mains power.

Back up all important data before starting the procedure.

Prerequisites

Required Hardware

A computer with an available USB port
USB to RS232 cable provided by us
RS232 to RJ45 cable provided with the inverter
The inverter to be updated
Update files (MCU and DSP) previously extracted

Required Software

"Remote Panel Reflashtool" software installed
Update files decompressed and ready to use
Initial Configuration

Preliminary Checks

Ensure that the update files have been extracted from their compressed archive
Disable automatic sleep mode on your computer to avoid any interruption
Detailed Procedure

1 Inverter Preparation

Stop certain inverter functions:

Completely disable the inverter output
Stop photovoltaic panel (PV) power supply
Keep battery and grid power active to allow communication

Check inverter status:

Ensure the inverter screen is on and functional
Verify that no critical alarms are active

2 Computer to Inverter Connection

Connect the USB cable to the computer:

Use an available and functional USB port
Wait for the operating system to detect the new device

Identify the assigned COM port:

Open Windows Device Manager
Expand the "Ports (COM & LPT)" section
Note the COM port number assigned to the newly connected device
This number will be needed for the update software configuration

Connect the other end of the cable (RJ45) to the inverter COM port:

Ensure the connection is firm and secure
Verify that the inverter recognizes the connection (usually indicated by a light or screen message)

3 MCU Update

Launch the update software:

Run the "Remote Panel Reflashtool" application
Wait for the main interface to display completely

Software configuration:

Select the previously identified COM port in the software settings
Verify that the communication speed is correctly configured (usually automatic)

Update initiation:

Click the "Update MCU" button in the software interface
Select the previously extracted MCU update file
Confirm your selection to start the process

Update monitoring:

Observe the update progress on the computer screen
Do not touch any equipment during this phase
Ensure the computer does not go to sleep
Typical update duration is 5 to 15 minutes depending on the inverter model

MCU update completion:

Wait for the confirmation message indicating the update is complete
Click "EXIT" in the software to properly close the update session

4 DSP Update (if necessary)

Preparation for DSP update:

Keep the inverter and computer connected
Ensure the inverter is still properly powered

DSP update procedure:

Restart the "Remote Panel Reflashtool" application if it was closed
Follow a similar procedure to the MCU, but select the DSP update file
Follow the on-screen instructions to complete this second update
Post-Update Verification

Version Control

Check in the inverter menu that the new firmware version is properly installed
Confirm that the update date matches the operation you just performed

Functional Test

Progressively reactivate all inverter functions
Verify that the inverter output works correctly
Reactivate photovoltaic panel power supply
Observe operation for several minutes to ensure stability
Common Troubleshooting

Inverter does not detect the connection

Check that the cable is properly connected on both sides
Try another USB port on the computer
Restart the inverter and computer

Update failure

Note the displayed error code
Verify that you are using the correct update files for your inverter model
Contact technical support providing the error code

Computer does not recognize the device

Install or reinstall the necessary drivers
Try another USB cable if available
Check in device manager if the device appears with an exclamation mark
Glossary

MCU

Microcontroller, the main "brain" of the inverter

DSP

Digital Signal Processor, processor specialized for signal processing

COM Port

Serial communication port used for connection between computer and inverter

RS232

Serial communication standard for data transmission

Technical Support Contact

In case of persistent difficulty or technical questions, our support team is at your disposal:

Please have your exact inverter model and any error codes available when contacting us.

Technical Document - Inverter MCU Update | Corrected Version

Follow this procedure carefully to ensure proper equipment operation

Loading...