PowerBrick+ PB+24/150 lithium battery - 150 Ah 25.6 V LiFePO4 3.84 kWh – IP65
€1,749.80
Tax included
PB+24/150
0768563817021
The PowerBrick+ PB+24/150 lithium battery is designed for 24 V solar battery energy storage, particularly as a replacement for a 24 V AGM battery. It provides 3.84 kWh at 25.6 V with a capacity of 150 Ah in LiFePO4 chemistry, and uses cylindrical cells in a claimed waterproof ABS casing. The integrated BMS monitors charging/discharging, temperature and balancing to ensure safe cyclic use.
- Specifications: It delivers 3.84 kWh (25.6 V, 150 Ah) with an energy efficiency > 98% and has 3,000 cycles at 100% DoD @ 1C and 4,500 cycles at 80% DoD @ 1C.
- Cells: It uses cylindrical LiFePO4 cells, which are suitable for cyclic energy storage use.
- BMS + communication: The integrated BMS monitors current, cell voltage and temperature, and manages balancing with a BMS cut-off set at 29.6 V on charge and 20 V on discharge.
- Compatibility + scalability: It can be assembled up to 4 units in series (up to 96 V) and up to 16 units in parallel to increase capacity.
🔋
Cette batterie est-elle faite pour vous ?
Vérifiez que
3.84 kWh
correspond à vos besoins
PowerBrick+ 150Ah battery module: Clean, sustainable energy for demanding applications
The PowerBrick+ 24V-150Ah lithium-ion battery offers maximum safety thanks to the use of cylindrical cells in Lithium Ferro Phosphate (LiFePO4 or LFP) technology.
The PowerBrick 24V-150Ah incorporates an innovative control system (BMS) in its casing, ensuring a very high level of safety during use. The BMS constantly monitors and balances the battery cells, to protect the battery and extend its life. The BMS also protects the battery from mishandling: deep discharge, overcharging, etc.
The PowerBrick+ range has been designed to replace lead-acid batteries, offering quadruple the energy density for the same weight and size.
Thanks to its technology, the PowerBrick+ 24V-150Ah lithium battery can be installed in any position (upright, on its side or upside down).
The electrical parameters of the PowerBrick+ 24V-150Ah lithium battery are fully compatible with those of a 24V AGM lead-acid battery. In the vast majority of cases, the charging system can be retained unchanged, and no additional accessories are required for replacement.
Since a PowerBrick+ battery can be discharged to 100% of its capacity, an AGM lead-acid battery can be replaced by a PowerBrick+ with a capacity 2x lower than that of the lead-acid battery (e.g.: a PowerBrick+ 50Ah replaces an AGM 100Ah battery).
The PowerBrick+ 24V-150Ah lithium battery has a nominal voltage of 25.6V. It can be easily assembled in series (up to 4 batteries in series) and in parallel (up to 15 batteries).
The voltage of the final assembly can be 24V and up to 96V (for 4 packs assembled in series), which meets the needs of virtually all electrical applications for traction, solar or wind storage, servicing, robotics, carts, etc.
The battery is protected by a splash-proof, dust-proof ABS case (IP65).
PowerBrick+ products are lightweight, compact, high-performance and can be used for all types of applications. PowerBrick+ directly replaces old-generation batteries (VRLA, AGM or OPZ lead-acid batteries) in 24V, which are inefficient and harmful to the environment (use of heavy metals and complexity of recycling).
The PowerBrick+ range comes with a 2-year commercial warranty, extendable to 5 years.
Lithium LiFePo 150 Ah batteries
- Extremely long service life: from 3,000 cycles to several tens of thousands
- Deep discharges possible (up to 100%)
- Completely safe Lithium Iron Phosphate technology (no risk of explosion or auto-ignition) BMS
- (Battery Management System) integrated into the case:
- maximizes battery life AND safety
- No lead, no rare earths, no acid, no outgassing
- Calendar life > 10 years
- Excellent temperature resistance (-20°C to +60°C)
- Flexible system :
- up to 16 packs in parallel and 4 in series
- Constant power throughout discharge (low internal resistance)
- Very low Peukert losses (energy efficiency >98%)
- Very low self-discharge (<3% per month)
- No memory effect
- Weight saving >50% and 40% smaller footprint than lead-acid batteries
- Certification: CE, RoHS, UN 38.3
Key points
- 24V-150Ah battery pack in Lithium Iron Phosphate (LiFePO4 - LFP) technology
- Nominal voltage: 25.6V
- Stored energy: 3.84 kWh
- New high-performance sealed cylindrical cell
- 3000 cycles at 100% DoD @ 1C
- 4500 cycles at 80% DoD @ 1C
- 98% energy efficiency
- Weight: 32.6Kg
- Dimensions: 500mm x 239mm x 217mm
- Instantaneous peak discharge current: 550A ±50A (max 300mS)
- Continuous discharge current: 120A (3.07kW)
- Maximum discharge current (< 30s): 180A (4.61kW)
- Maximum charging current: 100A
- Total safety provided by a BMS (Battery Management System) integrated in the case
- Monitoring of cell current and voltage, temperature, cell balancing, etc.
- Intelligent balancing algorithm
- 100% maintenance-free
- Series connection from 24V to 96V (1 to 4 units in series)
- Parallel connection up to 16 units (24V-2400Ah / 61.4kWh)
- Robust design in insulated, watertight casing (IP65 protection)
- Operating temperature on load: 0°C to +60°C
- Operating temperature on discharge: -20°C to +60°C
- Watertight ABS casing (IP65)
- CE, RoHS and UN38.3 certification
- 2-year commercial warranty as standard, extendable to 5 years
Dimensions
Specifications
| Electrical | |
| Nominal tension | 25.6 V |
| Nominal capacity | 150 Ah |
| Energy | 3,840 kWh |
| Internal resistance | ≤ 50m |
| Number of cycles | >3000 cycles |
| Self-unloading | < 3% per month |
| energy efficiency | > 98% |
| CHARGE STANDARD | |
| Charge tension | 28.8 V - 0.4V |
| Charge mode | CC/CV: Constant Current / Constant Voltage |
| Standard charge current (Continuous maxi current) | 100 A / 150 A |
| BMS cut-off voltage | 29.6 V - 0.1 V |
| STANDARD DISCHARGE | |
| Instant peak discharge current | 550 A - 50 A (max 300mS) |
| Continuous discharge current | 120 A (3.07 kW) |
| Maximum discharge current (< 30s) | 180 A (4.61 kW |
| BMS cut-off voltage | 20 V |
| environment | |
| Charge temperature | 0C to 60C |
| Discharge temperature | -20C to 60C |
| Storage temperature | 0C to 50C -60±25% relative humidity |
| Protection IP | IP 65 |
| mechanics | |
| Cell type | cylindrical |
| package | ABS |
| Dimensions (L x P x H) | 500 x 239 x 217 |
| weight | 32.6 kg |
| terminal | Bolt M8 |
PB+24/150
Data sheet
- Cycles
- 2000
- Storage temperature
- 0°C to 40°C @60±25% relative humidity
- Voltage
- 24V
- Technology
- Lithium
- Battery capacity
- 150Ah
- Width
- 500 mm
- Height
- 217 mm
- Thickness
- 280 mm
- Load current
- 60 A max.
- Max. discharge current
- 120 A (3.07 kW)
120 A (3.07 kW) - IP protection
- IP 55
- Weight
- 32,6 kg
- Video Youtube 1 - ID
- TSkV5tpVDq8
- Discharge temperature
- -20°C to 60°C @60±25% relative humidity
- Load temperature
- 0°C to 45°C @60±25% relative humidity
- Charging voltage
- 28.8V ± 0.4V
- BMS cut-off voltage
- 20 V
Charge standard 29.4 V ± 0.2V - DC discharge current
- 80 A (2.05 kW)
- Maximum continuous load current
- 60 A
Specific References
- UPC
- 768563817021
- EAN13
- 0768563817021
New
You might also like
Related articles
LiFePO4 Battery Balancing: An Essential Practical Guide
Adding new LiFePO4 batteries to an existing battery bank requires thorough pre-balancing. Find out why passive BMSs...
Read more
PowerBrick+ PB+24/150 lithium battery - 150 Ah 25.6 V LiFePO4 3.84 kWh – IP65 — Lithium battery
PowerBrick+ PB+24/150 lithium battery - 150 Ah 25.6 V LiFePO4 3.84 kWh – IP65 by PowerBrick+ is available in our Lithium battery catalog. Technical specifications: cycles: 2000, storage temperature: 0°C to 40°C @60±25% relative humidity, voltage: 24V, technology: Lithium, battery capacity: 150Ah, width: 500 mm, height: 217 mm, thickness: 280 mm , load current: 60 A max., max. discharge current: 120 A (3.07 kW) 120 A (3.07 kW), ip protection: IP 55, weight: 32,6 kg, video youtube 1 - id: TSkV5tpVDq8, discharge temperature: -20°C to 60°C @60±25% relative humidity, load temperature: 0°C to 45°C @60±25% relative humidity, charging voltage: 28.8V ± 0.4V, bms cut-off voltage: 20 V Charge standard 29.4 V ± 0.2V, dc discharge current: 80 A (2.05 kW), maximum continuous load current: 60 A. Product weight: 32.6 kg. Reference: PB+24/150.
