Pylontech Lithium Battery US3000C +74 - 3.6 kWh

Vertical integration

Vertical integration of the entire lithium battery industry chain FOCUS only on energy storage with more 4.5 GWh at the service of more than 500,000 users. Globally

Characteristics

• NEW: Built-in soft start function to reduce the current when the inverter needs to start from the battery.
• NEW: Double active protection at the BMS.
• NEW: Automatic adjustment of the address in case of multi-group connection.
• NEW: Support wake-up by a 5~12V signal from the RJ45 port.
• NEW: Support for updating the battery module from the top controller via CAN or RS485 communication.
• NEW: Allows a depth of discharge of 95%, available for the inverter that completely follows the latest Pylontech protocol to operate.
• The module is non-toxic, non-polluting and environmentally friendly.
• The cathode material is made of LiFePO4 with safety performance and long service life.
• The Battery Management System (BMS) has protection functions including overcharging, overcharging, overcurrent and high/low temperature.
• The system can automatically manage the state of charge and discharge and balance the voltage of each cell.
• Flexible configuration, multiple battery modules can be paralleled to increase capacity and power.
• The adopted self-cooling mode allows to quickly reduce the noise of the entire system.
• The module has less self-discharge, up to 6 months without charging it on the shelf, no memory effect, excellent performance of shallow charging and self-discharge.

Operating diagram