FlatFix flat roof system for portrait panels from 170 to 178 cm
FlatFix Fusion Flat Roof System for Panels 170 to 178 cm (Portrait)
FlatFix Fusion Flat Roof System for Panels 170 to 178 cm (Portrait)
Structure for solar panel installation
Structure for solar panel installation
FlatFix flat roof system for portrait panels from 170 to 178 cm
FlatFix Fusion Flat Roof System for Panels 170 to 178 cm (Portrait)
FlatFix Fusion Flat Roof System for Panels 170 to 178 cm (Portrait)
Structure for solar panel installation
Structure for solar panel installation

FlatFix Fusion flat roof system for portrait panels from 170 to 178 cm

€116.16
Tax included
Flatfix-Fusion-Portrait
0768563822803

Opt for high performance with the FlatFix Portrait system: the robust solution for your solar panels on flat roofs or on the ground.

The FlatFix mounting system in Portrait configuration (suitable for panels 170 to 178 cm in length/height) offers ideal space optimisation for your photovoltaic installations. Whether on a flat roof or directly on the ground (garden, terrace, flat surface), this weighted support guarantees perfect stability without any drilling, thus preserving the integrity of your support.

Thanks to its fixed 13° tilt, it provides an ideal compromise between annual energy yield and low wind resistance, even with increased height. Its aerodynamic design and "thermal decoupling" system protect your modules from mechanical stress caused by temperature variations. Lightweight and robust, the FlatFix Portrait can be assembled in record time thanks to its patented click-together system.

Compatible avec :

AIKO NEOSTAR 2S MONO GLASS-GEN2 460Wp
AIKO NEOSTAR 2S MONO GLASS-GEN2 460Wp
€108.35
Voir le produit →
AIKO NEOSTAR 3S+ DUAL GLASS-GEN3 470Wp
AIKO NEOSTAR 3S+ DUAL GLASS-GEN3 470Wp
€120.00
Voir le produit →
Leapton N-Type 450Wp TOPCon bifacial
Leapton N-Type 450Wp TOPCon bifacial
€84.95
Voir le produit →
Palette 37X AIKO NEOSTAR 2S MONO GLASS-GEN2 460Wp
Palette 37X AIKO NEOSTAR 2S MONO GLASS-GEN2 460Wp
€3,892.90
Voir le produit →
Pallet 36X Q-Sun Qrystal N8 N-Type 450Wp Bifacial
Pallet 36X Q-Sun Qrystal N8 N-Type 450Wp Bifacial
€3,155.47
Voir le produit →
Pallet of 37 AIKO NEOSTAR 3S+ DUAL GLASS‑GEN3 470 Wp solar panels
Pallet of 37 AIKO NEOSTAR 3S+ DUAL GLASS‑GEN3...
€4,704.10
Voir le produit →
Affichage de 6 sur 7 produits compatibles
ℹ️ Cette liste est non exhaustive. Contactez-nous pour vérifier une combinaison.

FlatFix Fusion Portrait mounting system for solar panels on flat roofs

The FlatFix Fusion Portrait system is a modular, quick and durable mounting solution for installing photovoltaic panels in portrait orientation on flat roofs. Designed by Esdec, the European leader in solar mounting systems, it combines simplicity, performance and safety.

IncludeD Élément de base supérieur

Upper base element (ref: 1007037)

Clip-on top bracket that defines the angle of inclination.

Included Embase support de toit

Roof support base (ref: 1007012)

Protective base that stabilises the structure on the roof.

Included Élement de base inférieur

Lower base element (ref: 1007027)

Ensures stability and protection of the roof.

Included Profilé de base

Base profile 1670 mm (ref: 1007197)

Horizontal rail ensuring alignment and rigidity.

Included Clame de milieu

Middle clamp(ref: 1003020)

Intermediate fixing with automatic earthing.

Included Clame de fin

End clamp(ref: 1004330)

Allows the last panel at the end of the line to be securely locked in place.

Included Vis d'assemblage

M6 mounting screw(ref: 1000655)

Stainless steel M6 mounting screw used for robust fastening of clamps and components to the FlatFix Fusion structure.





Structure légère

Compatible with almost all flat roofs

Whether your roof is made of bitumen, EPDM or PVC, FlatFix Fusion can be installed without drilling. Its universal design allows it to be installed on any flat surface while maintaining the waterproofing of your roof covering.

Montage Rapide

Ultra-fast "click" assembly

The main components are assembled using self-clicking joints. No need for multiple tools: the system clips together easily, radically reducing installation time.





Thermal integrity and building protection

The movable joints absorb thermal expansion. This decoupled system prevents any transmission of stress to the solar panels and preserves the long-term waterproofing of the roof.

Strategic ballasting and aerodynamics

Thanks to its 13° tilt angle and streamlined design, FlatFix Fusion requires minimal ballasting at strategic points, ensuring stability without structural overload.

Intelligent cable management

The structure incorporates cable guides to reduce the risk of interference and prevent direct contact between the cabling and the roof surface.

Transport and handling

Comprising a small number of lightweight parts, the system is easy to transport and handle. A single standard tool is all that is needed for complete assembly.





Flexibility and ease of installation

Solar panel installation – Easier, faster and simpler thanks to a high-performance solution. How? With FlatFix® Fusion, a modular and versatile mounting system designed for small to medium-sized flat roofs. For you, this means more efficiency and fewer complications.

Video duration: 03:42





How to configure your system?

Guide

1. Select the number of panels per row from the options.

2. For multiple rows, add each configuration to the basket individually.

Note: Compatible with panels between 170 and 178 cm long (Max. width: 1140 mm | Thickness: 30 to 50 mm)





Complementary products to the basic kit (not included):

Déflecteur de vent de côtés

Side wind deflectors

Ensures the aerodynamics of the system by closing the sides. Protects against wind and reduces the ballast load required.

(ref : 1007232 et 1007233)

Déflecteur de vent arrière

Rear wind deflector

Rear protective plate that deflects airflow over the panels for maximum stability while maintaining good ventilation.

(ref  : 1007233)

Rear deflector
Rack de lestage

Ballast rack

Allows ballast (bricks, concrete blocks or other items) to be placed securely under the structure to stabilise it in windy conditions.

(ref : 1007230)

Ballast rack





FAQ - FlatFix Fusion Portrait (Flat Roof)

1. What are the dimensions of the panels compatible with this portrait system? +
The FlatFix Fusion Portrait is designed for solar panels with a length between 170 and 178 cm. The maximum permitted width is 1140 mm, with a frame thickness ranging from 30 to 50 mm, ensuring compatibility with most current modules.
2. What is Esdec's ultra-fast "Click" mounting system? +
The system is based on main components that are assembled using self-clicking joints. This drastically reduces installation time on flat roofs, as the system clips together without the need for numerous complex tools.
3. Why is thermal decoupling important for my roof? +
The movable joints of the FlatFix Fusion absorb the natural thermal expansion of the materials. This decoupled system prevents mechanical stress from being transmitted to the solar panels and, above all, preserves the waterproofing of the roof covering in the long term.
4. Is this system compatible with EPDM or bitumen roofs? +
Yes, this universal design fits almost all flat roofs without drilling, whether they are covered with bitumen, EPDM or PVC. It stabilises the structure without damaging the surface thanks to its protective support bases.
5. What is the tilt angle of the panels with FlatFix Fusion? +
The system has a fixed tilt angle of 13°. This angle has been carefully calculated to maximise energy yield while minimising wind resistance and the ballast load required on the building structure.
6. How is the photovoltaic cabling managed with this structure? +
The structure incorporates smart cable guides. This reduces the risk of electrical interference and prevents direct contact between the cabling and the roof surface, protecting your cables from premature wear and tear.
7. Does the kit include panel earthing? +
Yes, the middle clamps provided in the kit incorporate automatic earthing. This simplifies the electrical installation and ensures that the entire solar field is safe as soon as the fasteners are tightened.
8. What accessories are essential to complete the installation? +
To ensure aerodynamics and stability, it is strongly recommended that you add wind deflectors (side and rear) and ballast racks. These complementary products help to secure the installation in strong winds.
Flatfix-Fusion-Portrait

Data sheet

Mounting
Flat roof - floor structure

Specific References

UPC
768563822803
EAN13
0768563822803

FlatFix Fusion flat roof system for portrait panels from 170 to 178 cm — Mounting systems

FlatFix Fusion flat roof system for portrait panels from 170 to 178 cm is available in our Mounting systems catalog. Technical specifications: mounting: Flat roof - floor structure. Product weight: 8.0 kg. Reference: Flatfix-Fusion-Portrait.