ZJBENY 1000V 32A single DC surge arrester cabinet
The 1000V BHS-2/1 DC box is installed between the solar panels and the solar inverter.
To protect the solar DC circuit from damage due to overcurrent or overvoltage, extend the life of the solar system and improve system safety.
Equipped with the most reliable DC components for maximum protection.
Dimensions (mm)
Schematic diagram
Features
| Maximum DC short-circuit current per input (Isc) | 15A (Modifiable) |
| Maximum output current | 32A |
| Material type | Polycarbonate/ABS |
| Degree of impact resistance |
IK10
| Dimension | 292 x 220 x 120mm |
| Cable input Input | PG09 Cable gland, |
| 2.5-16mm |
| Output cable gland | PG21 2.5-16mm |
| DC switch-disconnector | BYT.2-32/BYS |
| Rated insulation voltage | 1000V |
| Conformity to standard | IEC 60947-3 |
| Certification | UL, TUV,KEMA,SAA,CE |
| DC surge arrester | BUD-40/3 |
| Maximum operating voltage (Ucpv) | 1000V |
| Conformity to standard | EN 50539 Type 2 |
| Maximum discharge current | 40 KA |
| Fuse-holder |
DC| DC fuse |
holder
| Rated operating voltage | 1000V |
| Fuse link | 10x38mm LITTEL 15A |
C
| Operating temperature |
-20°C~+60°C
| Installation | Wall mounting |
@ 
Solar panels 
Autonomous solar kits 
Self-consumption solar kits 
Inverters & converters 
Charge controllers 
Solar battery 
Wind turbine 
Solar pumping 
Mounting and accessories 
Solar trackers 
Heating & air conditioning 
Made in Europa 
Mobility 
Promotional products 
Bulbs - LED neon lights - LED spotlights 
Garden and outdoors 
Assembly diagram 
100% secure payments
