Victron Phoenix VE converter. Direct 12/24/48V - 1200VA View full size

Victron Phoenix VE converter. Direct 12/24/48V - 1200VA

Victron energy

496,10 € tax incl.


Victron Phoenix VE converter. Direct 12/24/48/1200VA. 

Developed for professional use, the Range of Phoenix Converters is perfectly suited to a wide variety of applications.

Logo Victron

More details

More info



Port of communication VE. Direct


The PORT VE. Direct can be connected to:

A computer (VE interface cable. Direct-USB required).
Apple and Android smartphones, tablets, macbooks and other devices (a Bluetooth Smart electronic key communicating with EV. Direct is required).

Fully configurable


Reset levels and alarm activation in case of low battery voltage
Restart levels and shutdowns in case of low battery voltage
Dynamic cut: cut level depending on the load
Exit Voltage 210 - 245 V
50 Hz or 60 Hz output frequency
ECO detection level and ECO mode ignition/stop



Entry and exit voltage, % charge and alarms

Recognised reliability


The complete bridge topology with a toroidal transformer has demonstrated its reliability for years. Converters are protected from short circuits and overheating, whether in the event of an overload or high ambient temperature.

Strong start-up power


Needed to start loads such as power converters for LED bulbs, halogens or power tools.

Mode ECO


In ECO mode, the converter will switch on pause if the load drops below a predetermined value (minimum charge: 15 W). Once on pause, the converter will turn on for a short period of time (adjustable; by default: every 2.5 seconds). If the load exceeds a pre-configured level, the converter will remain on.

Diagnostic LED


A red LED light and a green indicate how the converter works and the condition of the various protections

On/off remotely


A remote ignition/stop switch can be connected to a connector at two poles or between the positive battery pole and the left contact of the two-pole connector.

To transfer the load to another CA source: the automatic transfer switch


For our low-power converters, we recommend using our Filax automatic transfer switch. The Filax has a very fast transfer time (less than 20 milliseconds) so that computers and other electronic equipment can continue to operate without interruption.

Screw terminals


No specific tools are required for installation.



Phoenix Converter12V / 1200
24V / 1200
48V / 1200
Continuous power at 25oC (1)1200 VA
Continuous power at 25cc / 40C1000 /850 W
Peak power2200 W
Frequency / CA output voltage (adjustable)230 VCA or 120 VCA - 3% 50 Hz or 60 Hz - 0.1%
Power voltage range9.2 - 17 V
18.4 - 34.0 V
36.8 - 62.0 V
Low CC current stop (adjustable)9.3 V
18.6 V
37.2 V
Dynamics (depending on load)
Low CC current stop (fully adjustable)
Dynamic cut
Alarm and restart CC low (adjustable)10.9V
Charged battery detection (adjustable)14.0V
Maximum efficiency91 / 91 / 92 %
Empty consumption7 W
10 W
Default vacuum consumption in ECO mode (default new test interval: 2.5s, adjustable)1
Start and stop power setting in ECO modeAdjustable
Operating temperature range-40 to 65 degrees Celsius (cooling per fan) (Reduction 1.25% by C above 25 degrees Celsius)
Humidity (without condensation)max 95%
Material and colourSteel frame and plastic cover (Blue RAL 5012)
Battery connectionScrew terminals
Maximum cable section25 / 10 / 10 mm2 / AWG4 / 8 / 8
Standard CA Takes230 V: Schuko (CEE 7/4), IEC-320 (male catch included) UK (BS 1363), AU/NZ (AS/NZS 3112) 120 V: Nema 5-15R
Degree of protectionIP 21
Weight7.4 kg / 16.3 lbs
Dimensions (HxLxP in mm)117 x 232 x 327 - 4.6 x 9.1 x 12.9 - (12V model: 117 x 232 x 362)
Remote on/off switchYes
Automatic transfer switchFIlax
SecurityEN-IEC 60335-1 / EN-IEC 62109-1
EmcIN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
Automotive DirectiveECE R10-4
1) Non-linear load, peak factor 3:1 

Data sheets and documentation


Weight7,4 Kg
Width232 mm
Height117 mm
Thickness327 mm
Inverter power12000VA