SolarEdge BAT-05K48 lithium battery - 4,600 Wh 44.8 V Li-Ion - LFP 4.6 kWh – CAN/RS485 communication
The SolarEdge BAT-05K48 lithium battery is a 4,600 Wh (4.6 kWh) energy storage system designed for the SolarEdge Home ecosystem and solar energy storage. It is a DC-coupled battery and its battery type is listed as Li-Ion - LFP, with a voltage range of 44.8 to 56.5 Vdc. It uses CAN/RS485 communication, with RS485 between battery blocks and CAN bus to the inverter.
- Specifications: It offers a nominal capacity of 4,600 Wh and a battery voltage range of 44.8 to 56.5 Vdc, with a continuous output power (charge/discharge) indicated at 2,825/4,096 W for a single unit.
- Cells: The battery type is specified as Li-Ion - LFP, which corresponds to LFP chemistry for energy storage and solar batteries.
- BMS + communication: The communication interfaces are specified as RS485 between battery blocks and CAN bus to the inverter, which corresponds to CAN/RS485 communication.
- Compatibility + scalability: It is advertised as compatible with SolarEdge Home Hub and Wave three-phase inverters, and it accepts up to 5 battery blocks per inverter, connected in parallel.
SolarEdge Home LV 4.6 – Intelligent Battery for Solar Energy Storage and Management
The LV 9.2 Home Battery is a 4.6 kWh energy storage system, specifically designed to optimize solar energy storage within the SolarEdge Home ecosystem. This DC-coupled battery model is compatible with the SolarEdge Home Hub and Wave three-phase inverters, enabling effective storage of excess energy, even in the event of a grid failure for backup configurations*.
![]() |
Important Notice for our customers in Belgium: A €158.08 VAT-excluded environmental fee will be applied to the purchase of each SolarEdge LV lithium battery. |
Main Features
- Storage Capacity: 4.6 kWh
- Compatibility: Designed for Europe, optimized for SolarEdge Home Hub and Wave inverters
- Scalable Installation: Ability to connect up to 5 battery modules in two stacks (up to 3 modules per stack)
- Centralized Management: Monitor energy production and consumption via a single SolarEdge app
- Energy Efficiency: Round-trip efficiency of up to 94.5%, maximized through DC-coupling technology
A Complete Solar Storage Solution
The SolarEdge Home LV 4.6 Battery allows for the storage of excess solar energy due to the over-sized DC capacity of SolarEdge inverters, which can reach up to 200%. This battery is designed to use this energy with no conversion loss, directly storing it for prolonged and optimized use.
Designed to work with SolarEdge Hub inverters, the LV 9.2 is a complete solution, from the roof to the grid, integrating Smart modules with power optimizers, smart devices, and a backup interface.
Optimization and Management via SolarEdge ONE
This battery is optimized by SolarEdge ONE, featuring advanced battery management modes to maximize efficiency. The SolarEdge ecosystem provides centralized monitoring of solar energy, storage, EV charging, and connected devices.
Fast and Flexible Installation
- Plug & Play Installation: Fast and simplified installation with automatic setup via the SetApp smartphone app
- Flexible Installation Options: Wall-mounted or on a floor stand, indoors or outdoors
- Simple Ordering: A single point of contact for products, warranties, customer support, and training, ensuring smooth logistics
Simplified Maintenance with mySolarEdge
Through the mySolarEdge mobile app, homeowners can easily track and manage the battery's performance:
- Real-time data and complete visualization of the battery's performance
- Automatic alerts with personalized troubleshooting recommendations
- Lifetime free monitoring, accessible on both computer and smartphone
Technical Specifications
- Round-trip efficiency: Up to 94.5% with DC-coupling
- Warranty duration: 10 years
- Stackable modules: Up to 5 modules per inverter for increased capacity
- Battery modes: 4 battery modes optimized by SolarEdge ONE
*Backup configurations are subject to local regulations and may require the SolarEdge Backup interface and a connection with the SolarEdge Home Hub three-phase inverter.
![]() |
Important Notice for our customers in Belgium:
|
Data sheet
- Width
- 540 mm
- Height
- 500 mm
- Nominal capacity
- 4600 Wh
- Communication interfaces
- RS485 between battery packs, CAN bus to inverter
- Standard warranty (years)
- 10 years
- Battery Type
- Li-Ion - LFP
- Battery Voltage Range
- 44.8 - 56.5 Vdc
- Weight
- 54.7 kg
- Noise
- inférieur 25 dBA
- Depth
- 240 mm
- Continuous output power (charge/discharge) - for a single battery pack
- 2825/4096 W
- Continuous output power (charge/discharge) - for multiple battery packs
- 5000/5000 W
- Peak cycle efficiency
- More than 95.4
- Battery packs per inverter
- Jusqu’à 5 connectés en parallèle
Specific References
- UPC
- 768563821783
- EAN13
- 0768563821783
SolarEdge BAT-05K48 lithium battery - 4,600 Wh 44.8 V Li-Ion - LFP 4.6 kWh – CAN/RS485 communication — Solar battery
SolarEdge BAT-05K48 lithium battery - 4,600 Wh 44.8 V Li-Ion - LFP 4.6 kWh – CAN/RS485 communication by SolarEdge is available in our Solar battery catalog. Technical specifications: width: 540 mm, height: 500 mm, nominal capacity: 4600 Wh, communication interfaces: RS485 between battery packs, CAN bus to inverter, standard warranty (years): 10 years, battery type: Li-Ion - LFP, battery voltage range: 44.8 - 56.5 Vdc, weight: 54.7 kg, noise: inférieur 25 dBA, depth: 240 mm, continuous output power (charge/discharge) - for a single battery pack: 2825/4096 W, continuous output power (charge/discharge) - for multiple battery packs: 5000/5000 W, peak cycle efficiency: More than 95.4, battery packs per inverter: Jusqu’à 5 connectés en parallèle. Product weight: 54.7 kg. Reference: BAT-05K48.



