@ 
Solar panels 
Autonomous solar kits 
Self-consumption solar kits 
Inverters & converters 
Charge controllers 
Solar battery 
Wind turbine 
Solar pumping 
Mounting and accessories 
Solar trackers 
Heating & air conditioning 
Made in Europa 
Mobility 
Promotional products 
Bulbs - LED neon lights - LED spotlights 
Garden and outdoors 
Assembly diagram 0
Victron SmartSolar Inverter RS 48/6000 230V
€2,297.79
Tax included
RS48/6000
0768563820076
The RS Smart Solar inverter combines the power of a 48 VDC, 6 kVA-230 VAC inverter with the high voltage of a 4 kW, 80-450 VDC MPPT solar charger. Thanks to its modern design and high-frequency technology, the converter weighs just 11 kg, and offers excellent efficiency, low quiescent power and very quiet operation.
100% secure payments
Victron SmartSolar Inverter RS 48/6000 230V
The RS Smart Solar inverter combines the power of a 48 VDC, 6 kVA-230 VAC inverter with the high voltage of a 4 kW, 80-450 VDC MPPT solar charger. Thanks to its modern design and high-frequency technology, the converter weighs just 11 kg, and offers excellent efficiency, low quiescent power and very quiet operation.
The inverter is equipped with a display showing battery, inverter and solar charger parameters. These parameters can also be transmitted for reading via Bluetooth to the VictronConnect application. In addition, the inverter has a VE.Can port for connecting a GX device to supervise the system, and a VE.Direct port for connecting a GlobalLink 520.
Off-grid solar inverter
The RS Smart 48/6000 solar inverter is a 48 V, 6 kVA inverter with 450 VDC PV input and
4 kWp. It is used in off-grid solar applications requiring AC power.
Combination of inverter, bidirectional DC-DC converter and MPPT
The inverter produces a perfect sine wave capable of powering high-power household appliances. It is powered by a bidirectional DC-DC converter that can either recharge the battery when excess solar power is available, or convert it from the battery when it is needed.
Wide MPPT voltage range
80 - 450 VDC, with a PV start-up voltage of 120 VDC.
Lightweight, efficient and quiet
Thanks to high-frequency technology and a new design, this powerful inverter weighs just 11 kg. What's more, it boasts excellent efficiency, low quiescent power consumption and very quiet operation.
Display and Bluetooth
The display shows the parameters of the solar charge controller, battery and inverter. The same settings can be accessed from a smartphone or device with Bluetooth enabled. In addition, the Bluetooth function can be used to configure the system and change settings using VictronConnect.
VE.Can and VE.Direct port
Allows connection to a GX device for system monitoring, data logging, and remote firmware updates.
Integrated PV isolator
Two parallel PV strings connected to MC4 connectors can be safely isolated using the integrated switch on top of the unit.
I/O connections
Connections for programmable relay, temperature sensor, auxiliary digital input and voltage sensor. The remote input is compatible with Victron's smallBMS as well as with other types of BMS with an "Allow-to-charge" signal.
Features
| RS Smart solar inverter | 48/6000 |
| INVERTER | |
| DC supply voltage range | 38 - 62 V |
| Output | Output voltage: 230 VAC +- 2% Frequency: 50 Hz +- 0.1 |
| Continuous output power at 25°C | Linear increase from 4800 W at 16 VDC to 5300 W at 52 VDC |
| Continuous output power at 40°C | 4500 W |
| Continuous output power at 65°C | 3000 W |
| Peak power | kW for 3 seconds |
| Short-circuit output current | 50 A |
| Maximum efficiency | 96.5% at 1 kW load 94% at 5 kW load |
| No-load consumption | 20 W |
| SOLAR | |
| Maximum DC voltage | 450 V |
| Nominal DC voltage | 300 V |
| Starting voltage | 120 V |
| MPPT operating voltage range | 80 - 450 V |
| DC input current limit Maximum DC input current | 18 A 20 A |
| Maximum PV input power | 4000 W |
| Maximum DC load power | 4000 W |
| Earth current trip level | 30 mA |
| CHARGER | |
| Programmable charger voltage range (VDC) | 36 - 60 V |
| Absorption" charging voltage (VDC) | Default: 57.6 V (adjustable) |
| Float charge voltage (VDC) | Default: 55.2 V (adjustable) |
| Maximum charging current | 100 A |
| Battery temperature sensor | Yes |
| Battery voltage sensor | Yes |
| GENERAL | |
| Parallel and three-phase operation | No |
| Programmable relay | Yes |
| Protection | - g |
| Data communication ports | VE.Direct port and VE.Can port |
| Bluetooth frequency | 2402 - 2480 Mhz |
| Bluetooth power | dBm |
| Universal analog/digital port | Yes, 2x |
| Remote On/Off | Yes |
| Operating temperature range | -40 to +65°C (fan cooled) |
| Humidity (non-condensing) | Max. 95% |
| CASING | |
| Material and color | Blue steel RAL 5012 |
| Degree of | IP21 |
| Battery connection | M8 nuts |
| AC connection 230 V | Screw terminals 13mm² (6 AWG) |
| Weight | 11 kg |
| Dimensions (h x w x d) | 425 x 440 x 125 mm |
| STANDARDS | |
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 |
| Emission, Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
RS48/6000
Specific References
- UPC
- 768563820076
- EAN13
- 0768563820076
New
