LiFePO4 lithium battery 0.82 kWh - PowerBrick+ PB+24/32 25.6 V 32 Ah – IP65
CFA275,374.79
Tax included
PB+24/32
0768563816338
PowerBrick+ lithium battery designed for 24 V systems, for solar battery energy storage (remote sites, servitude, light traction and industrial uses). It is based on LiFePO4 chemistry with cylindrical cells and an integrated BMS, which monitors charging/discharging, temperature and balancing to ensure safe use. It is suitable if you are looking for an IP65 waterproof battery capable of providing continuous power to a 24 V system.
- Specifications: 0.82 kWh (25.6 V, 32 Ah). Energy efficiency > 98%. 3,000 cycles at 100% DoD @ 1C and 4,500 cycles at 80% DoD @ 1C.
- Cells: cylindrical LiFePO4 cells, sized for a nominal voltage of 25.6 V and cyclic energy storage use.
- BMS + communication: integrated BMS with current, cell voltage and temperature monitoring, and balancing management; BMS cut-off during charging at 29.4 V and BMS cut-off during discharging at 20 V.
- Compatibility + scalability: It allows you to build a modular system with up to 4 batteries in series (up to 96 V) and up to 16 batteries in parallel, in order to increase capacity and autonomy.
🔋
Cette batterie est-elle faite pour vous ?
Vérifiez que
0.82 kWh
correspond à vos besoins
PowerBrick+ 24V 32Ah Lithium battery: Power and autonomy for your 24V applications
The PowerBrick+ range has been designed to replace lead-acid batteries, offering quadruple the energy density for the same weight and size.
Thanks to its technology, the PowerBrick+ 24V-32Ah lithium battery can be installed in any position (upright, on its side or upside down).
The electrical parameters of the PowerBrick+ 24V-32Ah lithium battery are fully compatible with those of a 24V AGM lead-acid battery. In the vast majority of cases, the charging system can be retained unchanged, and no additional accessories are required for replacement.
Since a PowerBrick+ battery can be discharged to 100% of its capacity, an AGM lead-acid battery can be replaced by a PowerBrick+ with a capacity 2x lower than that of the lead-acid battery (e.g.: a PowerBrick+ 50Ah replaces an AGM 100Ah battery).
The PowerBrick+ 24V-32Ah lithium battery has a nominal voltage of 25.6V. It can be easily assembled in series (up to 4 batteries in series) and in parallel (up to 15 batteries).
The voltage of the final assembly can be 24V and up to 96V (for 4 packs assembled in series), which meets the needs of virtually all electrical applications for traction, solar or wind storage, service, robotics, carts, etc.
The battery is protected by a splash-proof, dust-proof ABS case (IP65).
PowerBrick+ products are lightweight, compact, high-performance and can be used for all types of applications. The PowerBrick+ is a direct replacement for old-generation batteries (VRLA, AGM or OPZ lead-acid batteries) in the 24V range, which are inefficient and harmful to the environment (use of heavy metals and complex recycling).
The PowerBrick+ range comes with a 2-year commercial warranty, extendable to 5 years.
32 Ah LiFePo Lithium batteries
- Lithium Ferro-Phosphate (LiFePO4) pack - 24V - 32Ah
- Very high cycle life: from 3,000 cycles to several tens of thousands (see chart)
- Deep discharges possible (up to 100%)
- Completely safe Lithium Ferro Phosphate technology (no risk of explosion or auto-ignition) BMS
- (Battery Management System) integrated into the case :
- maximizes battery life AND safety
- No lead, no rare earths, no acid, no outgassing
- Calendar life > 10 years
- Excellent temperature resistance (-20°C to +60°C)
- Flexible system :
- up to 16 packs in parallel and 4 in series
- Constant power throughout discharge (low internal resistance)
- Very low Peukert losses (energy efficiency >98%)
- Very low self-discharge (<3% per month)
- No memory effect
- Weight saving >50% and 40% smaller footprint than lead-acid batteries
- Certification: CE, RoHS, UN 38.3
Key points
- 24V-32Ah battery pack in Lithium Iron Phosphate (LiFePO4 - LFP) technology
- Nominal voltage: 25.6V
- Stored energy: 819Wh
- New high-performance watertight cylindrical cell
- 3000 cycles at 100% DoD @ 1C (see technical graphs)
- 4500 cycles at 80% DoD @ 1C (see technical graphs)
- 98% energy efficiency
- Weight: 7.8Kg
- Dimensions: 197mm x 166mm x 169mm
- Instantaneous peak discharge current: 150A ±30A (max 300mS)
- Continuous discharge current: 50A (1.29kW)
- Maximum discharge current (< 30s): 75A (1.92kW)
- Maximum charging current: 32A
- Total safety ensured by a BMS (Battery Management System) integrated in the case
- Monitoring of cell current and voltage, temperature, cell balancing, etc.
- Intelligent balancing algorithm
- 100% maintenance-free
- Series assembly from 24V to 96V (1 to 4 units in series)
- Parallel assembly up to 16 units (24V-512Ah / 20.5kWh)
- Robust design in an insulated, watertight casing (protection class: IP65)
- Operating temperature on load: 0°C to +60°C
- Operating temperature on discharge: -20°C to +60°C
- Watertight ABS casing (IP65)
- CE, RoHS and UN38.3 certification
- 2-year commercial warranty as standard, extendable to 5 years
Dimensions
Specifications
PB+24/32
Data sheet
- Cycles
- More than 3000 cycles
- Storage temperature
- 0°C to +50°C @60±25% relative humidity
- Voltage
- 24V
- Technology
- Lithium
- Battery capacity
- 32 Ah
- Width
- 197 mm
260 mm - Height
- 169 mm
212 mm - Thickness
- 166 mm
168 mm - IP protection
- IP65
- Weight
- 13,6 kg
- Video Youtube 1 - ID
- TSkV5tpVDq8
- Discharge temperature
- -20°C to +60°C
- Load temperature
- 0°C to +60°C
- Usable energy
- 819 Wh
- Charging voltage
- 28.8 V ± 0.4 V (optional float: 26.72V max)
- BMS cut-off voltage
- Charge standard 29.4 V ± 0.2V
Décharge standard 10 V
Décharge standard 20 V - DC discharge current
- 50 A (1.29 kW)
- Max. discharge current
- 75 A (1.92 kW)
- Courant de charge standard
- 16 A / 32 A
Specific References
- UPC
- 768563816338
- EAN13
- 0768563816338
New
Related articles
L'Équilibrage de Batteries LiFePO4 : Guide Pratique Essentiel
Ajouter des batteries LiFePO4 neuves à un parc existant exige un équilibrage préalable rigoureux. Découvrez pourquoi...
Read more
LiFePO4 lithium battery 0.82 kWh - PowerBrick+ PB+24/32 25.6 V 32 Ah – IP65 — Lithium battery
LiFePO4 lithium battery 0.82 kWh - PowerBrick+ PB+24/32 25.6 V 32 Ah – IP65 is available in our Lithium battery catalog. Technical specifications: cycles: More than 3000 cycles, storage temperature: 0°C to +50°C @60±25% relative humidity, voltage: 24V, technology: Lithium, battery capacity: 32 Ah, width: 197 mm 260 mm, height: 169 mm 212 mm, thickness: 166 mm 168 mm, ip protection: IP65 , weight: 13,6 kg, video youtube 1 - id: TSkV5tpVDq8, discharge temperature: -20°C to +60°C, load temperature: 0°C to +60°C, usable energy: 819 Wh, charging voltage: 28.8 V ± 0.4 V (optional float: 26.72V max), bms cut-off voltage: Charge standard 29.4 V ± 0.2V Décharge standard 10 V Décharge standard 20 V, dc discharge current: 50 A (1.29 kW), max. discharge current: 75 A (1.92 kW), courant de charge standard: 16 A / 32 A. Product weight: 13.6 kg. Reference: PB+24/32.
