Enphase relay Q (multiphase) View full size

Enphase relay Q (multiphase)

Hoymiles

76,60 € tax incl.

Enphase IQ facilities, the Relay Q multiphase works as a device monitoring and disconnection of the network.

More details

More info

Enphase relay Q (multiphase)

 

Enphase IQ facilities, the Relay Q multiphase works as a device monitoring and disconnection of the network.
The relay Q isolates physically the microonduleurs of the series IQ of the network when anomalies are detected or according to the regulations of the network, and it will automatically reconnect when valid network conditions are re-established.
The relay Q Tetrapolaire allows you to isolate all phase conductors and the neutral and works with the gateway Envoy-S.

 

 

 

 

 

Easy to install

  • Light and simple
  • Mounting on DIN rail for quick installation

 

 

Fiable

  • Reliable load control
  • auto reset when returning to normal network conditions

 

 

Smart

  • Can be configured to monitor 1, 2 or 3 phases
  • Update remotely possible
  • Easy to understand by led indication

 

 

Technical characteristics

 

SPECIFICATIONS Q-RELAY-3 P-INT

Continuous protection of decoupling rcbo (50 Hz) with detection of component injection

Overvoltage category (EN 61010-1)III
CAT IIIGRID terminal is rated for measurement category III.
Pollution degree (EN 61010-1)2
Operating voltage AC range85 to 265 Vrms
Nominal input voltage (vname)230 / 240 Vrms
Rated frequency50 Hz
Acquisition time of the values of frequency and voltage in normal operation100 ms (5 line cycles @ 50 Hz)
Number of entries protected voltageUp to 3
Number of microinverters IQ 7 by phaseUp to 19 IQ 7 Microinverters Enphase microinverters or 16 microinverters Enphase IQ 7 +
Number of relay Q per systemLimited to 20 relay active Q by system

Electric output type

 Tetrapolar relay normally open (L1, L2, L3 and N)

Output power6 kVA per phase
Electric output type230 / 240 Vrms, 25A
Power consumption at idle18 GO
LEDsFour LEDs Red/Green: three for triggers in surge and soutension, one for triggering frequency (min f / f max) and component injection continues (DC)
Editing35 mm DIN rail (standard) rail
Width107 mm
Power surge - L1 output NCombination (1kV 2Ω)
Operating temperature range-40 ° C to 50 ° C
IP ratingIP 20 (to use in a protected environment)
Moisture0 to 95 without condensation
ComplianceIEC 61010, EN 61010-1

Compliance EMCI

IEC 61326, BS 50065-1 & 2-2, BS IN 61326 - 1 & 2, BS EN 61000-3-11 & 12

Warranty5 years

 

 

 

 

Product Reviews
  • Number of Reviews : 1
  • Average Grade : 5 /5
  • B. Maxime
  •  the 06/03/2019
  • 5/5
Rapport qualité prix ... impeccable