BT surge protector - single pole 40Ka
BT surge protector - single pole 40Ka
BT surge protector - single pole 40Ka
BT surge protector - single pole 40Ka

Single Polar BT Surge Protector - 40Ka DS41-480

€ 66,74
Belasting inbegrepen
DS41-480
0712971130333

Single polar BT surge protector for the protection of your system.

  • Type 2 unipolar surge protector,
  • Voltage: 530 V AC,
  • Nominal discharge current: 20KA,
  • Max discharge current: 40KA, 
  • Removable module by phase,
  • Very effective for the protection of a system against lightning,
  • Compliant with NF EN 61643-11, IEC 61643-11,
  • UL1449 ed.5 approved.

 

Removable single-pole BT Type 2 surge protector - DS41-480

 

 

Type 2 DS41 surge arresters are mainly used for the protection of single-phase and three-phase networks at TGBT. The electrical diagram includes a combination of high-power varistors equipped with disconnectors and their associated indicators: this assembly ensures a reinforced flow capacity. DS41 surge arresters are intended to be mounted in multipole to protect mono, tri or three-phase + Neutral networks, sometimes associated with a specific N/PE surge arrester.

Other models available on request, do not hesitate to contact us.

Dimensions parafoudre BT Type 2 - DS41-480

DS41-180

 

 

 

 

 

 

 

 

 

Features of BT surge protector

 

Type of surge arrester   2
Network   277/480 V three-phase
Rated line voltage One 277 Vac
Max. operating AC voltage CPU 530 Vac
Characteristic temporary overvoltage (TOV) 5 sec. .!UT 700 Vac held
Characteristic temporary overvoltage (TOV) 120 mn .!UT 920 Vac disconnection
Residual current Ipe < 0.5 mA
Functional current. Permanent Ic 0.5 mA
Follow-up current Yew None
Nominal discharge current In 20 kA
Maximum discharge current Imax 40 kA
Connection mode(s)   L/PE and N/PE
Protection mode(s)   Common Mode or Differential Mode
Level of protection Up 2.5 kV
Level of protection L/PE Up L/PE 2.5 kV
Permissible short-circuit current Isccr 25,000 A
Technology   .MOV
Lightning Arrester Configuration   Unipolar
Connection to the grid   Per screw: 2.5-25 mm² / per bus
Format   Removable modular housing
Assembly   Symmetrical DIN rail 35 mm (EN 60715)
Case material   Thermoplastic UL94 V-0
Operating temperature You -40/+85°C
Protection factor   IP20
Security decommissioning   Disconnecting from the AC network
End of life indicator   1 mechanical indicator
Replacement module(s)   DSM40-480
Remote signalling   DS41S-480 option: output on inverter contact
DS41-480

Specifieke referenties

upc
712971130333
ean13
0712971130333
Nieuw