Twerd 1kW wind inverter injection network
is a single-phase output inverter intended for use
with small wind power plants based on permanent magnet generators.
EOLIEN INVERTER 1Kw INJECTION RESEAU
is a single-phase output inverter intended to be used with small wind power plants based on permanent magnet generators.
Protections
Anti-island detection; protection against short circuits and surges
Under-voltage on the power grid
Thermal protection
Characteristics
| Entry (generator side) | |
| Generator type: |
permanent synchronous generator magnet
|
| power | 1 kW |
| Nominal tension | 3 x 230 Vac |
| Tension range | 3 x 60-280 Vac |
| Maximum current | 7A |
| Exit (electric grid side) | |
| tension | 1 x 230 Vac |
| The frequency |
50 Hz (-2.5 Hz .. 1.5 Hz)
|
| Nominal power | 1000 W |
| Nominal current | 7 A |
| Total harmonic distortion factor for the output current (THDi): | <3% |
| Energy consumption in standby mode | 2 W |
| General features | |
| Maximum efficiency | 97,00% |
| overloading | 110,00% |
| type |
On network, off-grid (with additional module)
|
| Digital outputs (relays): | 3 |
| Digital entries | 5 |
| communication |
Ethernet, Modbus RTU (RS-485)
|
| Protection index | IP65 |
| Dimensions (width x height x depth) |
338x433x183 mm
|
| weight | 14 kg |
Gegevensblad
- Windturbine
- With
- Spanning
- 12V / 24V
- Stroom
- 300 VA
Specifieke referenties
- upc
- 768563817205
- ean13
- 0768563817205
Twerd 1kW wind inverter injection network — Zonnepakketten voor zelfverbruik
Twerd 1kW wind inverter injection network is available in our Zonnepakketten voor zelfverbruik catalog. Technical specifications: windturbine: With, spanning: 12V / 24V, stroom: 300 VA. Product weight: 14.0 kg. Referentie: Twerd-mono-1kw.