Wind inser 3Kw injection network
is a single-phase output inmonator intended to be used
with small wind power plants based on permanent magnet generators.
WIND UPS 3Kw NETWORK INJECTION
is a single-phase output inmonator designed to be used with small wind power plants based on permanent magnet generators.
Protections
Anti-island detection; protection against short circuits and surges
Under-voltage on the power grid
Thermal protection
Characteristics
| Entrance (generator side) | |
| Generator type: | magnet permanent synchronous generator |
| Power | 3 Kw |
| Nominal tension | 3 x 230 Vac |
| Tension beach | 3 x 60-280 Vac |
| Nominal current | 10 A |
| Maximum current | 13 A |
| Exit (electric grid side) | |
| Voltage | 1 x 230 Vac |
| Frequency | 50 Hz (-2.5 Hz .. |
| Nominal power | 3000 W |
| Nominal current | 13 A |
| Total harmonic distortion factor for the output current (THDi): | 3 per cent |
| Energy consumption in standby mode | 2 W |
| General features | |
| Maximum efficiency | 97,00% |
| Overload | 110,00% |
| Type | On network, off-grid (with additional module) |
| Digital outings (relays): | 3 |
| Digital entries | 5 |
| Communication | Ethernet, Modbus RTU (RS-485) |
| Protection index | IP65 |
| Dimensions (width x height x depth) | 338x433x183 mm |
| Weight | 14 kg |
Datenblatt
- Windkraftanlage
- With
- Voltage
- 12V / 24V
- Leistung
- 300 VA
Spezifische Referenzen
- upc
- 768563817205
- ean13
- 0768563817205
Wind inser 3Kw injection network — Solarsets für den Eigenverbrauch
Wind inser 3Kw injection network is available in our Solarsets für den Eigenverbrauch catalog. Technical specifications: windkraftanlage: With, voltage: 12V / 24V, leistung: 300 VA. Product weight: 14.0 kg. Referenz: Twerd-mono.