1
    SRNE MPPT 12/24V 40A zonneregelaar
    SRNE MPPT 12/24V 40A zonneregelaar
    SRNE MPPT 12/24V 40A zonneregelaar

    Solar Regulator SRNE MPPT 12/24V 40A - MC2440N10

    $ 107,6
    MC2440N10
    0768563816734

    Using PowerCatcher MPPT technology, the MC Series solar charging controller tracks maximum energy for solar panels.
    This technology allows the controller to quickly and accurately track the maximum power point of a photovoltaic installation in any environment, to obtain the maximum production of a solar panel in real time and to greatly increase the energy efficiency of the solar system.

    11 artikel(en) in voorraad !

    Solar Regulator SRNE MPPT...

    $ 107,6

     

    Its strengths

     

    ♦ PowerCatcher technology, tracked by the maximum power point, allows the controller to track the maximum power point of the solar panels, even in a complex environment. Compared to traditional MPPT tracking technology, it offers faster response speed and greater tracking efficiency.

    A built-in MPPT (Maximum Power Point Tracking) algorithm significantly increases the energy efficiency of the photovoltaic system, which is about 15% to 20% higher than the traditional PWM charge.

    It offers an active control function of the charge voltage. When the battery is open-circuited or the BMS lithium battery overload protection is activated, the controller's battery terminal delivers the face value of the charge voltage.

    The effectiveness of MPPT follow-up is 99.9%.

    With advanced digital power technology, the circuit's energy conversion efficiency can reach 98%.

    Available for multiple types of batteries. It supports charging procedures for different types of batteries such as lithium batteries, colloidal batteries, sealed batteries, ventilated batteries, etc.

    A limited current charging mode is available. When the power of the solar panel is too high and the charge current is greater than the rated power of the valve, the regulator automatically reduces the charge power so that the solar panel can operate with the nominal charge current.

    Supports automatic identification of lead-acid battery voltage.

    It is possible to connect an external LCD screen or Bluetooth module to view operating data and equipment status, and it is possible to change the controller settings.

    Support of the standard Modbus protocol to meet communication needs on different occasions.

    An integrated overheating protection mechanism ensures that when the temperature exceeds the device's set value, the charge current decreases linearly with temperature.


     

    Characteristics

    ArticlesParameter
    ModelMC2440N10
    Tension of the system12/24V
    Zero load loss<10mA
    Battery voltage9V-32V
    Maximum open-circuit PV voltage92V (25oC); 100V (Lowest ambient temperature)
    Maximum voltage range at power point40A
    Nominal charge current550W/12V 1100W/24V
    Maximum PV input power
    Load conversion return >99%
    Temperature compensation coefficient-3mv/C/2V (defect); Lithium battery without temperature compensation
    Operating temperature-35C / 60C
    IP ratingIp32
    Weight of the device1040g
    How to communicateCommunication series TTL
    Altitude
    Dimensions (mm)183*127*65,5
    MC2440N10

    Gegevensblad

    Laadvermogen
    40A
    Spanning
    12V / 24V
    MPPT/PWM
    MPPT
    Breedte
    183 mm
    Hoogte
    127 mm
    Dikte
    69,5 mm
    Gewicht
    0,8 kg
    Video Youtube 1 - ID
    GXvxzPA7aBI

    Specifieke referenties

    Nieuw

    Downloaden

    Data SRNE MC Charge Contro. EN

    Downloaden (1.14MB)

    Manuel Reg SNRE MPPT-FR

    Downloaden (3.44MB)

    Dit vind je misschien ook leuk