Victron Blue Smart IP22 charger - 12/24 volts

Victron energy

260,63 € tax incl.

Options

Battery charger 180-265VAC.
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard.

Default outputs : 1 (3 outputs in option)


Select your charger : 12V : 15A, 20A or 30A  /  24V : 8A, 12A or 16A

Included : Connect clamps & M8 eyelet connectors

 

logo victron energy

 

More details

More info

" The highest efficiency ever! "


Description

 

The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

 

With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.

 

The battery is charged, smartly... to perfect condition

The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.

The Blue Power charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive
feature will automatically optimize the charging process relative to the way the battery is being used.

 

Recovery of deeply-discharged 'dead' batteries

Unlike other brands, the Blue Smart IP22 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.



Storage Mode: less maintenance and aging when the battery is not in use :
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.



Also charges Li-ion (LiFePO?) batteries :
LiFePO? batteries are charged with a simple bulk–absorption – float algorithm.



NIGHT and LOW setting :
When in NIGHT or LOW mode, the output current is reduced to max. 25% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.



Protected against overheating :
Output current will reduce as temperature increases up to 50°C, but the Blue Power charger will not fail.



Eleven LED’s for Status indication :
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION

 

 

 

Specifications

 

Specifications Blue Smart IP22

Specifications

Output Kit voltage12V, 24V
Charge power15A, 20A, 30A
Voltage12V, 24V
Weight1,3 kg
Width235 mm
Height65 mm
Thickness108 mm