Victron car battery chargers IP65 6/12V

Victron energy

74,46 € tax incl.

Options

Depending on the application, pods, grommets or cigarette lighter can be connected to the charger.

Low power charger for 6 and 12 V batteries: 
6 V/12 V IP65 charger-1.1 A 

Charger for 12 V batteries with two charging current options:  
12 V/4 A IP65 Charger – 12 V/0.8 A

 
Choose your model in the options6/12 volt

More details

More info

Car battery charger IP65

 


 

6 V/12 V-1.1 A

with 200 connector-265 VAC

 

• DC connector


Depending on the application, pods, grommets or cigarette lighter (all included) can be connected to the charger.

 

• Charging of 6 and 12 V batteries

 

The charger will automatically adapt its charging algorithm to 6 or 12 V batteries.

 

• Protection against overheating and reverse polarity connection

 

The output current will decrease if the temperature rises to 40 º C, but the charger will not fail.
The output relay is used as a protection against the connection in reverse polarity.

 

• Eight LEDs for status and mode indication


When the charger is connected to AC power, the STAND-BY LED will illuminate. No voltage will be present on the output.
Once connected to a battery, (the battery voltage must be greater than 2 V in the case of a 6 V battery, and at 7 V in the case of a 12 V battery), the charging process is started by pressing the MODE button.
The battery charge status is indicated by 4 LEDs.

1) red LED marked 25% flashes: charge state less than 25%. 

2) red LED marked 25% lit, and red LED marked 50% flashes: charge state less than 50%.

3) red LED lit, and yellow LED marked 75% flashes: charge state less than 75%. 

4) the red and yellow LEDs are illuminated, and the Green LED marked 100% flashes: the battery is almost charged. 

5) all charge level LEDs remain lit: the battery is fully charged. Liquid electrolyte batteries, AGM or GEL. Ambient temperature below 10 º C, or batteries requiring a higher charge voltage (e.g. OPTIMA spiral cell batteries). 

 

Characteristics

 

Car charger IP65
Supply voltage range 200-265 V
Frequency 50/60 Hz
Charging voltage 7.2 or 14.4 V
Battery capacity 1.2-30 Ah
Charging current 1.1 A max.
Usable as a power supply No [output relay]
Absorbed return current 3 Ah/month (4 mA)
protection Reverse polarity, temperature
Operating temperature range -20 to + 40 °c (nominal output power up to 25 °c)
Humidity (non-condensing) Max 95%
Housing
Material and color PC black
Battery connection Black and red cable of 1.2 meters.
Connection to battery terminals, M6 grommets or 12 V socket (included)
Connection 230 VAC 1.5 meter cable with CEE 7/7 plug
Degree of protection IP65
weight0.56 kg
Size (hxwxp)42 x 61 x 185 mm
Standards
safety EN 60335-1, EN 60335-2-29
program EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3

 

From 12V/4A-12V/0, 8A

with 200-265 VAC connector

 

• DC connector


Depending on the application, pods, grommets or cigarette lighter (all included) can be connected to the charger.

 

• Less maintenance and aging when battery is not in use: standby mode


Standby mode is triggered when the battery has not been solicited for 24 hours. During standby mode, the float voltage is lowered to 13.2 V to reduce the gaseous release and corrosion of the positive plates. Once a week, the voltage is raised at the absorption level to "equalize" the battery. This function prevents the stratification of the electrolyte and sulfation, the major causes of early failures of a battery.

 

• Protection against overheating and reverse polarity connection


The output current will decrease if the temperature rises to 40 º C, but the charger will not fail. The output relay is used as a protection against the connection in reverse polarity.

 

• Five LEDs for status and mode indication


When the charger is connected to AC power, the STAND-BY LED will illuminate. No voltage will be present on the output.
After having connected it to a battery (the battery voltage must be greater than 8.5 V), three load profiles can be selected with the button fashion:

1) current limited to 0.8 A and an absorption voltage of 14.4 V. The red LED will illuminate. 
2) 4 A current and 14.4 V absorption voltage. The red LED > 14ah will light up. Application: liquid electrolyte batteries, AGM or GEL. Ambient temperature 10-35 °c. 
3) 4 A current and absorption voltage of 14, 7V. The Red COLD LED will illuminate. 

applying:

Liquid electrolyte batteries, AGM or GEL. Ambient temperature below 10 º C, or batteries requiring a higher charge voltage (e.g. OPTIMA spiral cell batteries).

 

Characteristics

 

Car charger IP65
Supply voltage range 200-265 V
Frequency 50/60 Hz
Charging voltage 14.4 or 14.7 V
Charging voltage "float"13, 6V
Charging voltage (standby)13, 2V
Charging current 4 a or 0.8 A
Usable as a power supply No [output relay]
Absorbed return current 0.25 Ah/month (0.3 mA)
protection Reverse polarity, temperature
Operating temperature range -20 to + 40 °c (nominal output power up to 25 °c)
Humidity (non-condensing) Max 95%
Housing
Material and color PC black
Battery connection Black and red cable of 1.2 meters.
Connection to battery terminals, M6 grommets or 12 V socket (included)
Connection 230 VAC 1.5 meter cable with CEE 7/7 plug
Degree of protection IP65
weight0.56 kg
Size (hxwxp)42 x 61 x 185 mm
Standards
safety EN 60335-1, EN 60335-2-29
program EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3

Specifications

Voltage12V-6V/12V
Weight0,56 kg
Width185 mm
Height42 mm
Thickness61 mm