Kit REGO-C standard for caravan or boat

TBB Power

1 131,35 € tax incl.

This kit includes a control panel with Bluetooth connection, a panel with switches, a sensor for water tank, connection cables and a power management device for caravan or boat.

More details

More info

Kit Rego

This kit includes :

  • A power manager: Caravan Master Power
  • A control board: Central Control Panel
  • A sensor for water tank: AQUA Water Tank sensor
  • Connection cables for TBB products

Kit Rego-C lite

CMP deviceSpecially developed for use in campers and caravans. TBB's Smart CMP (Caravan / Camper Master Power) is the focal point of the motorhome or caravan thanks to the many built-in functions. This unit easily replaces the current power module in your motorhome / caravan if it is defective, or if it is no longer sufficient due to increased consumption.

Specially developed for use in campers and caravans. TBB's Smart CMP (Caravan / Camper Master Power) is the focal point of the motorhome or caravan thanks to the many built-in functions. This unit easily replaces the current power module in your motorhome / caravan if it is defective, or if it is no longer sufficient due to increased consumption.

  • 12V20A Smart Battery Charger (30A in Power Mode)
         - Active PFC loading
         - Temperature compensated load
         - Voltage compensated load
  • Float loader for starter battery
  • Solar Charge Controller (PWM), 25Vdc 30A
  • 14 merged DC outputs
  • 3 outputs for lighting support for brightness adjustment, max 2.5A each
  • 12V100 battery charge relay
  • Low voltage protection battery 12V 40A
  • Built-in battery switch
  • Integrated shunt for accurate measurement of the battery
  • Control a water pump with two tank probes
  • Spring terminal
  • T-bus compatible
  • Bluetooth optional

ModelCMP1225
Electrical Specifications
Grid155-265 VAC 50/60Hz
Power factor0.9
Input surge10 A
BatteryStarter battery12 VDC
Station battery12 VDC
PVOpen circuit voltage15 ~ 25 VDC
Max charging current20 A
Charging relay12 VDC 100 A
Service battery chargercharge algorithmsTBB premium II - 5 steps
rated charger output current20 A
Temperature compensationAutomatic
Voltage compensationAutomatic
Starter battery charger3A, float charging
Power cupply modeNominal output voltage12.8 ± 0.2 VDC
Rated output current25 A
Efficiency90%
Others
Battery disconnectDisconnect voltage10.5 VDC
Reconnect voltage11.5 VDC
Battery drain after disconnectionAutomatic
Fused outputsNumbers11
Rated current10 A x 7 ; 15 A x 4
ProtectionShort circuit outputYes
Reverse polarityfuse blown
Overload protectionreduce output
Battery charger over temperatureshut down at 90°C
Battery over temperatureshut down at 55°C
Battery over voltage limitsshut down at 16 VDC
Physical specifications
Dimensions (L*W*H)263x141x227 mm
Weight (kg)5.3
Enclosuresteel case
Coolingforced cooling
Protection categoryIP20
Approvals
LVDEN60335-1, EN60335-2-29
EMCEN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3

Affichage

Usually, there are multiple panels on board belong to various electrical equipments. It is inconvenient to read and need more space for installation. Furthermore, it is very difficult and even impossible to relate one to another.

With Crystal, this is no more a harassment. It is the digital control center for complete on board power system. It enables the monitoring and controlling of all connected TBB T-bus products and can perform as the control center of on board electrical system. Optional Wifi module or Bluetooth is available for remote monitoring with smartphone.

  • T-Bus design, can be connected to multiple equipments
  • System monitoring
  • Configuration
  • Back light

Membrane switch panel

Membrane switch panel

Probe for water tank

sonde pour réservoir à eau

Connection cables

câbles de connexion

Data sheets and documentation

Specifications

Type of needCamping-car / Boat