11,5Wp solar kit - 26Ah - 12V

Solar panel : 11,5Wp

Charge controller: 10A

Battery : GEL 12V 26Ah

Battery cables : 2m

Solar cable : 5m

Supplied with all wiring and connectors

replenishment lead time is 07 novembre 2018 More info

More details

145,54 €

Add to cart

By buying this product you can collect up to 14 loyalty points. Your cart will total 14 points that can be converted into a voucher of 4,20 €.

4.5 / 5 - 4 reviews

More info

"Kit with wiring and connectors included"



Panneau solaire 20Wc

Solar panel 11.5Wp

The small size of the panel (360 x 310 x 15 mm) make it an ideal companion for mobile applications.

  • Wind Resistance: ? 130 km / h
  • Maximum diameter of the hailstone: 25 mm
  • Hailstone impact speed: 80 km / h
  • Lightweight anodized aluminum frame and reinforced










Maximum power (Pmax) (W)


Open circuit voltage (Voc)


Short circuit current (Isc)


Maximum power voltage (Vmp)


Max. compressive load5400 Pa

Maximum power current (Imp)


Efficiency of the solar panel18.5%

Dimensions (mm)

360 x 310 x 15 mm

Weight (kg)




Frame size

15 mm

Made in


Ultracell 26Ah Battery

Battery GEL 12v 26 Ah

Gel batteries are sealed batteriesno maintenanceno addition of distilled water. 
Strengthened compared to flooded batteries.
A gel battery to withstand the discharge to 100% and its rated capacity when discharged holding time is short. 
This series has a longer discharge time compared to other batteries. The special plate design increases the life of the battery and especially in warmer temperatures. A separator in the battery improves performance. It also has a longer 
retention time.

  • rated voltage: 12V 
  • capacity : 6Ah
  • Dimensions : L 166 x  W 175 x H 125 mm
  • weight : 8,9 Kg

regulateur de charge epsolar pwm 10A 
PWM Solar regulator 10A

-Capacity: 10A
-Operating voltage: 12V or 24V
-Temperature compensation
-Warranty: 2 years
-Technology: PWM

-Three system voltage configuration : 12V, 24V or 12V/24V auto work 
-High efficiency PWM charging with temperature compensation
-3 LEDs shows PV charging, battery and load status
-External temperature sensor interface
-RS-485 bus communication
-Open standard Modbus communication protocol
-Software update function




cable solaire et cable batterie

 Solar cable crimped with MC4

To connect the panel to the regulator

- 6m Solar cable 2x6mm² : 2m

To connect the battery to the windturbine regulator

- 2m battery Cable 16mm² :

To connect the batteries together




Wind TurbinWithout
Output Kit voltage12V
Battery storageWith storage
Number of panels1 panel
BatteryKit with battery
Inverter power- de 1000VA
Grid reinjectionoff-grid
Product Reviews
  • Number of Reviews : 4
  • Average Grade : 4.5 /5
  • G. François
  •  the 20/06/2018
  • 4/5
pas encore installé.
  • C. Jacques
  •  the 09/06/2018
  • 4/5
  • N. Jean Pierre
  •  the 29/04/2016
  • 5/5
tres bien
  • J. Jean-Louis
  •  the 25/04/2016
  • 5/5
Rie à redire