11, 5Wc - 26Ah - 12V solar Kit


145,54 € tax incl.

Solar Kit 11, 5Wc
Pre-wired, built up in 10 minutes

-Solar Panel: 11, 5Wc 
-Charge controller: 10A
-Battery: GEL 12V 26 Ah
-Cable and connectors: 5 m solar cable, 2 m cable battery


More details

More info

Kit solar 20Wc at low prices

Panneau solaire 20Wc


Polycrystalline Solar Panel 12V 11, 5Wc

The small size of this Panel (360 x 310 x 15 mm) make it an ideal companion for mobile applications.

The frame is aluminum weatherproof. The Panel provides a mechanical stability particularly strong to ensure ease of installation and transport.

  • Wind resistance: 130 km/h
  • The hailstone maximum diameter: 25 mm
  • The hailstone impact speed: 80 km/h
  • Light and reinforced aluminum frame







Maximum power (Pmax) (W)


Voltage in open circuit (Voc)

22, 2V

Short circuit current (Isc)

1.16 A

Maximum power voltage (Vmp)

18, 43V

Solar Panel efficiency12,13%

Maximum power current (Imp)

1.09 A

Maximum compressive load5400 Pa

Dimensions (mm)

472 x 350 x 18

Weight (kg)




Thickness of the framework

18 mm



Batterie 28Ah Ultracell

GEL 12V 26Ah battery



Gel batteries are sealed batteries: no maintenance, no addition of distilled water. Security strengthened compared to the open lead batteries.
A GEL battery can support 100% discharge and find its rated capacity if discharged hold time is short. This series has a longer discharge time compared to other batteries. Its special design of the plate increases the lifetime of the battery, especially in warmer temperatures. A separator in the battery to improve its performance. There is also a longer preservation time.


  • Nominal voltage: 12V 
  • Capacity: 26Ah
  • Dimensions: L 166 x w 175 x H 125 mm
  • Weight: 8.9 Kg


 regulateur de charge epsolar pwm 10A

LS1020B 10A PWM regulator


  • Capacity: 10 amperes.
  • Tension: 12v or 24V
  • This regulator can accommodate up to 250 watts of solar panels (in a 24V system)
  • Temperature compensation 
  • 2-year warranty.
  • Technology: PWM.
  • Fully programmable if used with its display
           All the tensions of charges can be changed from 9 to 17V (X 2 for 24V), disconnection voltage also
           Programming of output consumer according to a day/night or a time mode

câble solaire



5 m cable 2X4mm² solar

To connect the control panel to the charge controller
We clamp the connectors directly in our workshop

Thanks to the double sheath, these cables are extremely resistant to UV, heat, cold and bad weather.

 • 2 m cable 2X4mm² with pod battery to connect the charge controller to the battery


Number of panels1 panel
Wind TurbinWithout
Output Kit voltage12V
Battery storageWith storage
BatteryKit with battery
Inverter power- de 1000VA
Grid reinjectionoff-grid
Product Reviews
  • Number of Reviews : 4
  • Average Grade : 4.5 /5
  • G. François
  •  the 20/06/2018
  • 4/5
pas encore installé.
  • C. Jacques
  •  the 09/06/2018
  • 4/5
  • N. Jean Pierre
  •  the 29/04/2016
  • 5/5
tres bien
  • J. Jean-Louis
  •  the 25/04/2016
  • 5/5
Rie à redire