Sermatec 10kW self-consumption optimization kit


9 152,64 € tax incl.

Add to cart

Sermatec 10kW INverter
Batteries Pylontech 50Ah 48V

The battery charges during the day thanks to the production of photovoltaic panels. 
It discharges during the day when production is below consumption and at night to limit the discharges of energy on the distribution network to the bare minimum.
This system is suitable for a household with an approximate consumption of 4300 kW/year.


More details

Descriptions équipements


See product
Sermatec 10kW hybrid inverter


3 226,67 €


Choice of batteries

See product
Pylontech Lithium Battery H48050 -200


4 914,46 €


See product
Pylontech Lithium Battery H48050 -250


6 143,07 €


See product
Pylontech Lithium Battery H48050 +300


7 371,70 €



See product
Pylontech battery connection cable


24,90 €


Choice of BMS

See product
Pylontech control module SC-0500-100S


986,61 €


More info

Sermatec Hybrid Inverter 10kW 48V


Sermatec Hybrid Inverter 10kW 48V

It allows users to produce their own energy, to obtain certain economic benefits.
When solar energy is sufficient, the inverter draws energy from the PV station to power consumers, and the remaining power will charge the energy of the batteries. The inverter automatically powers the battery charge.
When the battery's energy runs out, the inverter takes power from the grid, powers consumers and recharges the battery.
This all-or-nothing network inverter can be installed indoors or outdoors.


• APP setting
• Automatic match
• Multi-languages
• Self-diagnosis, maintenance-free



• Compatible with various input sources
• Ufepo4 compatible - lead battery
• Solar access, network and generator
• Soon, the ability to put several inverters in parallel (under development)
• On-off-grid mode switching time less than 10 ms, can be used as UPS
• Single-phase, three-phase output for residential and commercial applications



• High efficiency at 99%
• Advanced tracking technology to improve the efficiency of the PV station
• High-precision MPPT control algorithm and INV algorithm allowing a high-efficiency network connection and autonomous energy conversion.


You can look at your consumption from your facility

  You can look at your consumption from your facility

There is an asymmetry between our electricity needs and the production of our solar installation.
As can be seen, the Hybrid inverter allows via batteries, storage of unused production during the day (red line down).
So you enjoy in the morning and evening the energy produced throughout the day (red line up).
The yellow highlight indicates the production of energy via solar panels.
The electricity consumption used on the network is shown in blue (blue line down).
The reinjection of electricity produced by the panels is injected onto the network (blue line up).


We will observe a consumption on a day Whole

At 04:00 we use the public grid for our energy needs

At 10:00 a.m.: the panels produce 3002 W and the batteries recharge.

At 2:35 p.m.: The battery consumes 10.60 W and 2665 W is injected into the public grid.170 W.

At 9:00 p.m.: Using the battery to meet our energy needs.

View the charge level of your batteries 

 View the charge level of your batteries 


icon : Range charging setting batteries

Range charging setting batteries


At 8am on 20/09 battery Is 30% of its Ability charging, the inverter will trigger the recharge of the battery, the charging takes place at hours set up from the inverter, so you can choose the time slots Where it is decided to recharge the batteries, once 100% the inverter no longer sends the energy to the battery but sends the unused energy to the public grid. from 7 p.m. Battery starts to discharge / we use the energy of the battery to meet our energy needs. Starting at 7 p.m. Battery starts to discharge / we use the energy of the battery to meet our energy needs.



icon: Application Sermatec Mate


Application Sermatec Mate download in the first place.




You can install the Sermatec Mate app (see app icon) by clicking on the various store (Android, IOS), this application allows a simple and fast installation of your Sermatec inverter.


To put the app in French, follow the following steps:

Steps to change the language

Setting up Wi-Fi on your inverter


Step: Setting up Wi-Fi on your inverter



European Server Settings 


Come in in the server's IP box, and 19042 in the server's port box.
Send the settings by tapping Proceed;
Make sure that All the inverter's LEDs turn off and restart. This will confirm that the setting has been taken into account



Step: Setting up Wi-Fi on your inverter







Setting the router 


Select the working mode as a way to connect to the platform, enter the router's name and password (the router's name and password can only contain English characters or numbers),
Send the settings by tapping Proceed;
Make sure the inverter's LEDs turn off and restart. This will confirm that the setting has been taken into account.









product model
PV Entry (DC)
Max. Pv Power14000 W
Max. Tension PV1000Vdc
Nominal PV voltage720Vdc
Max. Pv Input Current12.5 A / 12.5 A
MPPT voltage range200 to 880 Vdc
MPPT number2
Battery-side data
Battery voltage range180 to 800 Vdc
Nominal battery voltage400Vdc
Max. current charge/ discharge25A / 25A
Network CA data
Nominal CA power10,000 W
Nominal network voltage
230Vac / 400Vac; 220Vac / 380Vac; 3 / N / PE
Nominal frequency of the network50 Hz / 60 Hz
Nominal alternating current14.5 A
Max. Alternative Current16.7A
Power factor
0.8cap ... 0.8ind
Load CA data (EPS / UPS / off-grid)
Nominal power10,000 W
Nominal alternative tension
400Vdc; 380Vdc; 3 / N / PE
Nominal current10 ms
Switching time50 HZ / 60 HZ
Peak power at 25 degrees Celsius14.5 A
Nominal frequency16.7A
maxi. alternating current
11 kW - 30 min 13 kW - 5 min; 15 kW - 5s
THD (Linear Charge)< 3%
MPPT Efficiency99,90%
European efficiency97%
Max. Efficiency97,60%
Load/discharge efficiency97,6% / 96%
Protective function
Protection against CC polarity reversalYes
Protection from residual currentYes
CA short-circuit protectionYes
Protection from over-intensities /CA tensionsYes
Built-in CC SwitchYes
Isolation monitoringYes
Size (X-width high X depth)
548 - 550 - 188 mm
weight< 40 kg
Consumption on standby< 20 W
IP ClassIP 65
Operating temperature
-25 degrees Celsius ... - 60 degrees Fahrenheit
altitude< 2000M
Noise emission< 30 dB
Natural cooling
Interface de Communication
WIFI - GPRS (optical) - RS485
EN 62109-1: 2010 / EN 62109-2: 2011 / CIS 62109-1 (ed.1) CIS 62109-2 (ed.1)
IN 61000-6-1: 2007 / IN 61000-6-2: 2005 / IN 61000-6-3: 2007 / A1: 2011 / IN 61000-6-4: 2007 / A1: 2011
Network connection standard
VDE-AR-N 4105: 2018 / NRS 097-2-1: 2017 / IN 50549-1: 2019 / AS / NZS 4777.2: 2015 / CIS 0-21: 2019 / PPDS2018 / IEC 61683: 1999 / RD 1699: 2011 / UN 206006 / IN: 2011 / UN 206007-1 / IN: 2013 / NTS 2019 (Type A, PO 12.2 2018-10) / C10 / 11: 2019-09

BMS Pylontech SC-0500-100S

BMS Pylontech SC-0500-100S


Battery management system used to control LiFePO4 H48050 batteries. 
It allows you to efficiently connect and manage the charge and discharge of each battery module. 
This model is used in the POWERCUBE X1 high voltage battery.






Related productX1
Controller's operating voltage100/430Vdc
How the VOltage system works100/430Vdc
Charge Current (Max.) (A)100
Discharge voltage (Vdc)100/430
Discharge Current (Max.) (A)100
Auto - Consumer Power (W)8
Dimensions (L x P x H, mm)442*390*132
Protective classIP20
Weight (Kg)8.2
Device life15 years
Operating temperature-20/65oC
Storage temperature-40/80oC
Product certificateTV,CE

Lithium Pylontech Battery H48050Lithium Pylontech Battery H48050


The high-voltage battery module H48050 2.4 KWH Li-Ion is a HESS battery system supplied by Pylontechdeveloped with their own cell in the Phosphate iron and iron Lithium to ensure the best safety value and the most promising life cycle.


• Vertical integration chain;
• Modular design with different densities, suitable for all scenarios;
• Flexible voltage range 150VDC To 1000VDC;
• Its design of the three-layer management system offers the highest reliability;
• Setting up the system Rack or in Container.



Capacity (kWh)2.40
Nominal tension (Vdc)48
Nominal capacity (AH)50
Tension range (Vdc)45-54
Discharge depth80%(10-90%)
Dimension (L-P-H,mm)442*390*100
Protective classIP20
Device life10-year-olds
Lifecycle of the operation4000
Operating temperature0-50 degrees Celsius
Storage temperature-20-60 degrees Celsius
Product certificateT-V (IEC62619)

Acrel Energy Counter 



• Comprit with the Sermatec inverter
• Phase: Single Phase
• Operating temperature: -25-60Brand
• Name: ACRELPower
• Supply: ACDisplay
• Type: LCDRated
• Tension: 270VDIY
• Supplies: Electrical accuracy
• Class: Class 1



Wind TurbinWithout
Type of needProsumer
Battery capacity100Ah
BatteryKit with battery
Inverter power5000VA
Grid reinjectionoff-grid