Enphase battery

Enphase

2 750,00 € tax incl.

The Enphase AC Battery™ is simple to install, safe, very reliable, and provides the lowest lifetime energy cost for both new solar customers and retrofit customers. In addition, as an installer, you can design the right system size to meet the needs of the homeowner.

More details

More info

The Enphase AC Battery™ is simple to install, safe, very reliable, and provides the lowest lifetime energy cost for both new solar customers and retrofit customers. In addition, as an installer, you can design the right system size to meet the needs of the homeowner.


Simpler

 

  • Quick and easy single person installation
  • Plug and play installation
  • Interconnects with standard household AC wiring

Safer

 

  • No high voltage DC in system
  • Cells safety-tested and certified by TÜV Rheinland
  • Prismatic cells are highly stable over time

Greater Reliability

 

  • Lithium iron phosphate (LFP) chemistry for long cycle life
  • 10-year warranty
  • Modular design promotes redundancy

MODEL NUMBERB270-1200-LN-I-AU00-RV0 (with integrated S270-ACB-LN-YY Enphase Microinverter)
OUTPUT DATA (AC)@ 230 VAC
Peak output power270 VA
Rated (continuous) output power260 VA
Nominal frequency50 Hz
Extended line to neutral voltage range184 to 276 VAC
Extended frequency range45 to 55 Hz
Power factor0.7 leading to 0.7 lagging
Maximum units per 20 A branch circuit13
Peak inverter efficiency96.9%
BATTERY CHEMISTRY 
Capacity1.2 kWh
Depth of discharge (usable capacity)>95%
Ambient operating temperature range-20ºC to 45ºC
ChemistryLithium Iron Phosphate (LFP)
Cell safety certificationsTUV Rheinland, UL
Roundtrip cell efficiency¹96%
MECHANICAL DATA 
Dimensions (2)390 mm (W) x 325 mm (H) x 220 mm (D) (without bracket)
Weight25 kg
InstallationWall mounted in an indoor, unoccupied space using standard AC wiring in conduit or in wall, where allowed.
EnclosureIndoor – IP20
CoolingNatural convection – No active or passive cooling infrastructure required
Grid configurationTN-C-S
FEATURES AND COMPLIANCE 
CompatibilityCompatible with grid-tied PV systems using the Enphase Envoy-S™ Metered gateway
CommunicationPower Line Communication (PLC), TCP/IP through Envoy-S
ServicesMaximising self-consumption of solar, time-of-use bill management, power export limiting³
MonitoringEnlighten Manager and MyEnlighten monitoring options
ComplianceCertification Pending: AS/NZS 4777.2, AS/NZS CISPR 22, AS/NZS 62040.1.1, UN 38.3
LIMITED WARRANTY 
Limited Warranty (4)>80% capacity, up to 10 years or 7300 cycles

1. At 25°C.
2. Mounting wall plate is 490/650mm wide, interleaved, allowing 450 mm or 600 mm battery-to-battery spacing.
3. Optional. Requires Enphase S-Series Microinverters™ to implement.
4. Whichever occurs first. Restrictions apply.

 

Data sheets and documentation

Specifications

Voltage230V