Epever PWM LS1012EU 12V / 24V - 10A with USB output

10A LandStar Serie Epever controller 12V/ 24V.

New generation programmable solar charge controller. Ideal for small solar system such as home system.

PWM solar controllers protect your batteries from discharges and overcharging, ensuring optimum service life.

USB Output : 1,2A /5V

Epever

 

stock quantity : 16 More info

More details

26,00 € tax incl.

Add to cart

By buying this product you can collect up to 2 loyalty points. Your cart will total 2 points that can be converted into a voucher of 0,60 €.


4.3 / 5 - 4 reviews

More info

" Solar regulator LS1024EU - 10A with USB output" 

 

Epever's new generation programmable solar charge controller 10A. Adopt aluminum heat sink which enables the reliability in high temperature enviroments.

 

DESCRIPTION

  • Capacity: 10A
  • Operating voltage: 12V or 24V
  • Temperature compensation
  • Warranty: 2 years
  • Technology: PWM
  • USB output 1,2A / 5V
 
 
 
The theoretical charging of a lead acid battery operates in three phases:
graphique fonctionnement batterie plomb

 

 

- Phase 1: the current is limited to a rate of about 1/5 of the rated capacity. The voltage increases gradually until it reaches its maximum regulated threshold to 2.35 V / element.


- Phase 2 : the charging voltage is regulated to 2.35 V / element, the charging current then decreases to less than C/100. This phase should last up to 20 hours, the voltage must not stay above 2.26 V longer. The battery is chargedat the end of this phase


- Phase 3: once the battery is charged (after about 20 hours of charging) it switches to trickle charge (Floating) to keep it at 100% load. Then the voltage applied to the battery is around 2.26 V / element.

 

 

 

Applications

  • Solar home systempwm 10A avec sortie USB
  • Solar lighting system
  • Solar road signals
  • Solar surveillance
  • Solar RVs and boats
  • Small solar power station

 

Features

  • Three system voltage configuration : 12V, 24V or 12V/24V auto work 
  • High efficiency PWM charging with temperature compensation
  • 3 LEDs shows PV charging, battery and load status
  • External temperature sensor interface
  • RS-485 bus communication
  • Open standard Modbus communication protocol
  • Software update function
  • USB output 1,2A / 5V

 

Electronic protections

  • PV array short circuit
  • Overcharge 
  • Load short circuit
  • PV reverse polarity
  • High voltage transients
  • Over discharge  
  • Load overload 
  • Battery reverse polarity
  • Overheating

 

Specifications

ModelLS1024EU
Nominal system voltage12/24VDC
Rated battery current10A
Maximum PV input voltage50V
Self-consumption≤6mA
Temp. compensation-5mV/℃/2V (ref)
Equalize charging voltageGel : / , Sealed: 14.6V,  Flooded: 14.8V
Boost charging voltageGel: 14.2V,  Sealed: 14.4V,  Flooded: 14.6V
Float charging voltageGel /Sealed /Flooded: 13.8V
Low voltage reconnect voltageGel /Sealed /Flooded: 12.6V
Low voltage disconnect voltageGel /Sealed /Flooded: 11.1V
Dimension120.3x67x21.8mm
Mounting holes111.5mm
Terminal4.5mm2
Weight0.10kg
Working temperature-35?~+55?
Storage temperature-35?~+80?
Humidity?95% (NC)
EnclosureIP20

 

 LS1024EU schema

 

 

 

Monitor software 

 

Please, download the last version of the monitor software here

 

Specifications

Charge power10A
Voltage12V / 24V
MPPT/PWMPWM
Maximum PV input voltage50 V
Max. current10 A
Product Reviews
  • Number of Reviews : 4
  • Average Grade : 4.3 /5
  • D. Julien
  •  the 25/08/2017
  • 5/5
très simple à installerfait bien le boulot
  • L. Yannick
  •  the 04/08/2016
  • 4/5
Bien
  • A. BRETON
  •  the 15/06/2016
  • 4/5
merci
  • C. Sebastien
  •  the 15/02/2016
  • 5/5
corespond tres bien a la description