Floor mounting kit for Soprasolar Fix Evo solar panels

Soprema

Soprasolar® Fix Evo is a non-perforated photovoltaic waterproofing process for roofing terraces with the installation of photovoltaic modules on a patented stud system.

It allows the integration of sealed photovoltaic modules, on new or existing buildings, into insulated roofs on a set of polymer pads bonded to a self-protected waterproofing coating without drilling and without ballasting in order to create solar renewable electricity generating installations.

Price upon request

More details

More info

 

"Simple to install, lightweight, resistant"

 

Soprasolar® Fix Evo is a non-perforated photovoltaic waterproofing process for roofing terraces with the installation of photovoltaic modules on a patented stud system.

It allows the integration of sealed photovoltaic modules, on new or existing buildings, into insulated roofs on a set of polymer pads bonded to a self-protected waterproofing coating without drilling and without ballasting in order to create solar renewable electricity generating installations.

  • Single-layer or high-performance two-layer sealing of the SOPREMA range under Technical Advice;

  • Implementation with zero slope or higher (limited to 60%);

  • Without piercing the seal at the studs;

  • Easy maintenance;

  • No need for surveys at the right of the studs;

  • Height-adjustable studs;

  • Without metal rails;

  • Not weighted;

  • Lightweight (less than 14 kg excluding insulation and bitumen membrane);

  • Out of water without the pads and modules;

  • Surface connection;

  • Under E.T.N. (New Technique Survey);

  • Warranty 20 years of the system (if complete package according to SOPRASOLAR® recommendation and respect of the obligatory maintenance);

  • Without thermal bridge.

 

 

 

Section 2D

 

 

Mounting

 

 

 

 

 

 

 

Elements Soprasolar Fix EvoThe PLOT SOPRASOLAR FIX EVO is composed of a height-adjustable pad in fiberglass-filled polyamide mechanically bonded to a PLASTRON SOPRASOLAR. It allows the connection between the photovoltaic modules and the waterproofing coating without perforating the latter.

 

 

 

 

The COVER PLOT SOPRASOLAR FIX EVO is made of unarmed TPO in gray color. It protects the PLOT SOPRASOLAR FIX EVO from the UV radiation of the sun by adapting to the height of the adjustable part.

 

 

 

 

The SOPRASOLAR FIX EVO CALIPERS are used to connect the SOPRASOLAR FIX EVO PLOTS and the photovoltaic modules.

THE SOPRASOLAR CAGE NUT is used to fix elements (photovoltaic modules, solar thermal panel, metal support structure, over-roof elements, etc.) on the SOPRASOLAR FIX EVO PLOT.

 

 

 

Specifications

Type fixationStructure sol
Mounting systemRoof mounting
Mounting systemFree-land mounting