Micro inverter Enphase iQ7

Enphase

149,00 € tax incl.

Enphase Energy microinverters system to increase energy production and reliability while maximally simplifying the design, installation and management of photovoltaic systems.

More details

More info

Enphase microinverters IQ 7 and IQ + 7

 

 

 

The microinverter revolutionize solar technology high-performance Enphase IQ 7™ and Enphase IQ 7 +™ are all ready for the smart Grids.

An integral part of the Enphase system IQ, IQ 7 and IQ + 7 fit perfectly with the Envoy - S™ and the monitoring and analysis Enphase Enlighten™ software. Oobtain the best performance from each of your panels as well as a followed detailed. The ENPHASE microinverter is activated with the gateway ENVOY. Without ENVOY, the microphone will not work. In addition, ENPHASE cables are inseparable to ensure the guarantee of the products.

The IQ 7 and the IQ 7 + microinverters exceed the reliability and robustness standards established by previous generations of microinverter and undergo more than one million hours of tests in charge, allowing Enphase offer a guarantee outstanding.

 

 

 

  • 20 year warranty

The Enphase 20 years warranty is a significant advantage in your calculation of profit or return on investment. Rare are those who can aspire to such a performance over time.

 

 

  • Easy to install
  1. Light and simple
  2. Faster installation with an improved and light wiring to two sons

 

 

  • Productive and reliable
  1. Optimized for great power of 60 cells with 72 cells modules *.
  2. More than a million of cumulative testing hours
  3. Envelope to double insulation class II

 

 

  • Ready for Smart Grids
  1. Meets the requirements of complex network, in terms of voltage and frequency of decoupling management
  2. Updates remotely to respond to changes in the network constraints
  3. Configurable for different network profiles

 

* The microinverter IQ 7 + is required for 72 cells modules

 

 

 

Technical characteristics

 

INPUT DATA 

(DC) IQ7-60-2-INT

Power module recommended (STC) ¹235 W - 350 W +.
Compatibility60 - cells only
DC max input voltage48 V
MPP voltage range27 V - 37 V
Operating voltage range16 V - 48 V
Start min/max voltage22 V / 48 V
Short-circuit current DC max15A
Class of overvoltage DC portII
Return of DC port under a single fault0A
Configuration of the PV generatorThe lateral protection CA requires a maximum of 20A per branch circuit

 

DATA OUTPUT (AC)

 

Microinverter IQ 7

Peak output power250'S
Maximum output power240'S
Voltage nominale² voltage/range230 V / 184-276 V
Maximum output current1.04 HAS
Rated frequency50 Hz
Frequency range45 - 55 Hz
Maximum number of units per branch of 20 A³16 (ph + N)
Surge protection classIII
Return of the CA port flow0A
Fixed power factor1.0
(Adjustable) power factor0.7 inductive to 0.7 capacitive

 

PERFORMANCE

 

@230 V

Performance in 50530 (EU)96.5%

 

MECHANICAL DATA

 
Operating ambient temperature range -40ºC to + 65ºC
Permissible range of relative air humidity4% to 100% (condensation)
DC connector typeMC4 or Amphenol H4 UTX (requires an adapter Q-DCC-5)
Dimensions (WxHxD)212 mm x 175 mm x 30.2 mm (without stand)
Weight1.08 kg
CoolingNatural convection - no fan
Use in wetYes
Degree of pollution3
EnvelopeClass II double insulation, casing polymer resistant to corrosion
IP ratingOutside - IP67

 

FEATURES

 
Communication with the Envoy-SCPL (Powerline)
MonitoringMonitoring Enlighten Manager and MyEnlighten Compatible with Enphase Envoy-S options
Compliance (current)AS 4777.2, RCM, IEC / 61000-6-3, IEC / EN 62019-1, IEC / 62109-2

 

1. no limitation of the DC/AC ratio. See the online compatibility Calculator: enphase.com/fr-fr/support-client/modules-compatibles 2. The beach of rated voltage may be extended beyond these nominal values to meet the constraints of network manager. 3. the limits may vary. See local requirements to define the number of microinverters by branch in your area.

 

 

 

 

Specifications

Monophasé / TriphaséMonophasé
Nombre de MPPT1 MPPT
Inverter power- de 1000VA