0
    Victron EasyPlus 12/1600/70 inverter and charge controller
    Victron EasyPlus 12/1600/70 inverter and charge controller
    Victron EasyPlus 12/1600/70 inverter and charge controller

    Victron EasyPlus C 12/1600/70 converter/controller

    €1,301.96
    Tax included
    CEP121620000
    0712971128217

    Victron EasyPlus 12/1600/70 inverter and charge controller.
    The EasyPlus is a multifunctional energy system consisting of

    • a powerful sine wave inverter,
    • a sophisticated battery charger,
    • a high-speed AC transfer switch
    • and AC distribution ,


    in a single, lightweight, compact package.

    100% secure payments

    Victron EasyPlus C...

    €1,301.96

    "EasyPlus C 12/1600/70: the all-in-one solar energy solution "

    Technical specifications

    • 12V 1600VA sine wave inverter (peak power: 3000W)
    • 70A charger included

      4A
    • maintenance load for starter battery

    • Unique PowerAssist® technology protects the generator from overloading by increasing inverter power when needed.


    • Adaptive 4-step charging for fast, optimized battery charging

    • The AC distributor consists of an RCD ( 30mA / 16A) and four AC outputs protected by two 10A and two 16A circuit breakers

    • One 16A output is controlled by the AC input: it will switch on only when AC power is available.
    • RCD ( 30mA / 16A ) on AC system output

    • No system break: uninterrupted switching between ground/generator and inverter

    • Battery cables included

    Dimensions :

    Height: 510mm
    Width: 214mm
    Depth: 110mm
    Weight: 11.7kg


    Standard installation

    Schéma des branchements


    5-step installation: quick and easy

    EasyPlus takes its name from its simplicity of installation and operation. The system can be installed in five simple steps, saving both time and space. The Easy Plus comes complete with AC connectors and sockets, and is supplied with battery cables already fitted, so you can save installation time.


    Step 1. Choose a suitable location for the EasyPlus (as close as possible to the batteries) and install the wall bracket. Attach the EasyPlus to the bracket and secure it with the screws supplied.


    Step 2. Connect the genset/generator input and output circuits
    (including the water heater's dedicated power supply) to the Easy Plus.


    Step 3. Connect the control panel (optional) with the UTP connection cable.


    Step 4. Connect battery and temperature sensor cables for batteries
    (Also supplied as standard).


    Step 5. Switch on RCD, AC distribution, charger/inverter and
    the system is ready for use.

    CEP121620000
    500 Items

    Data sheet

    Charging power
    70A
    Voltage
    12V
    Power
    1600 AV

    Specific References

    UPC
    712971128217
    EAN13
    0712971128217
    New

    Download

    EasyPlus C 12 Victron-FR

    Download (1.63MB)